Grand Seiko, Nagano, Japan - Watchmaker Video Introduction This video is "Inside Grand Seiko, Episode One: The Master Craftsman" produced by "Hodinkee". It is a valuable video that shows us the state and production process of the workshop that makes the world-class precision watches "Grand Seiko." The commitment of these Watchmaker's cannot be overlooked! The Japanese Micro-Artist Studio Behind Grand Seiko Watches Source :YouTube screenshot Seiko Epson's Shiojiri office in the Koshinetsu region and the Suwa region of Nagano prefecture, introduced in this video, was established with the aim of inheriting the techniques of the watchmaker "Micro Artist Studio." "Every one must be beautiful," says watchmaker Yoshifusa Nakazawa, a watch assembler who continues to produce watches in this studio (0:50 in the video). Mr. Nakazawa has been active as a watch assembler since joining the company in 1978, and in 1981 won the World Skills Competition in Japan. In this workshop, the assembly of the movement (the part that controls the driving of the wristwatch), the installation of the dial, and the case insertion are all performed consistently, so that steps such as maintenance and overhaul can be easily performed. From 1:06 of the video, you can see how precisely each watch is assembled, sometimes using a microscope. From 3:23 in the video, he says, "Mr. Nakazawa inherits 100% of the technology of assembling watches, and the best watches are assembled neatly." What Is Grand Seiko's Original Mechanism the "Spring Drive"!? Source :YouTube screenshot The mechanism “spring drive” mounted on Grand Seiko, which can be seen from 2:51 in the video, is said to be a third engine that combines machinery and quartz. It has a history of 20 years as a model symbolizing the Grand Seiko brand. The model called "44GS" established the design of Seiko style in 1967. It lists three policies, which are as follows: 1. Design consisting of a plane and quadratic surface, with a plane as the main body. Cubic surfaces are not used in principle. 2. Increase the area of the flat surface as much as possible over all cases, dials and hands. 3. In principle, each surface is a mirror surface, and distortion from each mirror surface is minimized as much as possible. Based on this policy, the 44GS was designed with nine features. This Seiko style is designed to spice up the beauty of Japan. It considers the "light" of Japanese people, and those who hold it can feel the beauty of the Japanese in its undistorted, flat planes. Grand Seiko can be called a work packed with the aesthetic sense of Japan. Master Shops Where You Can Buy Limited Items From Grand Seiko Photo：SEIKO The Grand Seiko Master Shops refer to about 140 shops in Japan that have signed a contract with Seiko, and there are several types of limited models sold only to that master shop. Not only men models, but valuable diver models and ladies' models are popular as well. For a list of watches, see the official website. In addition, you can apply for battery replacement from the official website, so please check it out. Of course, Grand Seiko can also be purchased online. Summary of the Popular Japanese Watch Grand Seiko Source :YouTube screenshot Japan's proud Grand Seiko watches have a high reputation in Japan and around the world as watches with a history and ideology. At the end of the video, Nakazawa says, "I imagine that those who use Grand Seiko watches will hand them over to the next generation and pass them on." Why not get your own watch? One that has been created as a work of art that inherits Japanese technology. 【Official Website】Grand Seiko Official Site https://www.grand-seiko.com/us-en

A Look at Japan's Currency Manufacturing Technology This video, titled "Japanese Currency Manufacturing Technology" (日本の貨幣製造技術), was released by "Japan Video Topics - 日本語". Japanese currency is created in accordance with the "Acts on Currency Units and Issuance of Coinage" (通貨の単位及び貨幣の発行等に関する法律). Currently, 6 types of coins and 4 types of banknotes issued by the Bank of Japan are in circulation, and 3 billion banknotes are printed every year. The History and Unique Characteristics of Japanese Currency Source :YouTube screenshot Today's Japanese banknotes are made through a method in which design and engraving specialists create the original designs with a brush, design a copper plate similar to a woodblock print and it is then printed by the National Printing Bureau. You can see the production process of these banknotes from 0:48 in the video. Throughout the long history of Japan, such as the Showa and Heisei periods, coinage technology of has dramatically improved. The value of Japanese coin manufacturing technology is recognized around the world, and in recent years, coin manufacturing has become a typical Japanese culture, with some people being asked to manufacture foreign coins as well. The Unique Ingenuity Incorporated Into Japanese Currency Source :YouTube screenshot Japanese banknotes and silver coins are actually packed with many innovations that bring together the advanced technology of traditional Japanese manufacturing. For example, Japanese bills have a watermark that makes a portrait appear when held over light. Ink is used for banknotes to create bumps when printing, so even blind people can touch the banknote and know what type it is. In addition, advanced anti-counterfeiting technology is used for Japanese floral patterns, such as the use of "Bank of Japan" micro-lettering, which cannot be color-copied, and "diagonal jaggedness" on the sides of the coins. Other advanced technologies such as "latent imaging," "fine lining," and "fine dotting," are also used in Japanese currency manufacturing. This amazing technology has been praised around the world for its ability to check the latent images and holograms of the 10,000-yen bill and the portraits and vertical bars of the 1,000-yen bill by touching, tilting, or holding them up to light. Summary of Japan's Currency Manufacturing Photo：Japanese money Japan's coinage is not something that can be seen often, so be sure to check it out if you still haven't yet! In Japan, the notes are scheduled to change in 2024, so keep an eye out for the new designs! In addition, commemorative coins are likely to be issued at events, such as the Olympics, so be sure to get one if you visit!

This video, titled "ダンボールのダイアル式金庫 　[Dial Combination Safe　(cardboard)]," was released by "Makocchio Noto." It introduces a dial safe made of cardboard, and the video shows how it's opened. The cardboard used is usually used for storing vegetables and other items. The safe is pretty impressive considering it's just cardboard and other materials you can find lying around. The creative ideas of the maker are remarkable. It really helps you understand how deep manufacturing goes.

This video, titled "[Changes in Cargo Handling] Transportation Pallet Work (1958)｜Logistics Archives｜Nippon Express" (荷役はかわる　通運のパレット作業（1958）｜物流アーカイブズ｜日本通運), was released by "Nippon Express Official Channel" (日本通運 公式チャンネル). This video explains about cargo handling in 1958. For more than a hundred years, cargo handling has been done by hand. However, this method had many disadvantages, such as the burden on the person carrying it and damage to cargo. The advent of forklifts, pallets, and roller conveyors changed this old-fashioned cargo handling operation. By mechanizing and streamlining the process using these devices, the efficiency of cargo handling operations has greatly improved! It has brought about a revolutionary change in cargo handling. This video shows how cargo loading and unloading has changed, from the old-fashioned loading and unloading of the past, to the mechanization of work today.

This video, titled "Miyagi University Graduation Project 'A Glimpse at the Karakuri Box'" (宮城大学卒業制作 「からくりを覗く」), was released by "Minoru Suzuki" (鈴木実訓). A karakuri box is a box with an opening mechanism on its surface and inside that can only be opened through certain actions. In ancient times, people used to hide important things in these secret boxes. In this several-minute video, titled "A Glimpse at the Karakuri Box," the filmmaker unravels the mechanism by taking out a smaller box out of a square box and opening the box in a nonchalant manner. How does this box open? The best part of the karakuri box is not so much the storage itself, but the process of unraveling the karakuri and opening the box. Enjoy stimulating your curiosity with this video!

This video, titled "[I See!] How to Write Beautiful Calligraphy From Left to Right!!" (【なるほど！】横書きをキレイに書くコツ教えます！！), was released by "Crown Prince Takumi" ( 東宮たくみ). Are you confident in your kanji? Many people feel anxious and uncertain about their handwriting? In this video, Takumi Higashimiya, a popular, long-time calligrapher, teaches you how to write beautiful kanji! In this episode, he shows how to make the characters look neat in "horizontal writing," a not-so-common way to write calligraphy. His advice on balancing the size of kanji and hiragana is a must-see! If you're learning Japanese, this can be a great tool to help improve your handwriting!

This video, titled "Alpha JX VS TOTO C200 SW2044 Washlet Bidet Toilet Seat Comparison | BidetKing.com," was released by BidetKing. The Alpha JX and TOTO C200 are two pillars of the Bidet Seats. Alpha JX is the most trusted by BidetKing users. And the TOTO C200 is manufactured by industry giant TOTO and is one of the most popular bidet seats in the country. In this video, two affordable, yet top-quality bidet seats are compared to see which one is better. The Alpha, known for its low-profile design, sturdy lids, and LED nightlights, or the TOTO, with its superior low-profile design and functionality, which one is better?

This video, titled "Professional sheet metal skills that repair dents like they never happened! A Look at Shizuoka Prefecture's Sheet Metal Repair Technology! Car Factory Hakamada (Hamamatsu City, Shizuoka Prefecture)" (プロの鈑金技術で事故車にならずに凹みを修復！　自動車修理鈑金技術を見学　カーファクトリーハカマダ（静岡県浜松市）), was released by "Momo Channel! [A Wireless Outdoorsy Youtuber With a Car]" (ももチャンネル! 【無線と車でアウトドアなYouTuber】). This video takes you on a tour of Car Factory Hakamada in Hamamatsu City, Shizuoka Prefecture, to see how they repair cars. They show a car with big scratches and dents on the side from when it hit a wall. If the scratched and dented parts were to be replaced, the car would be considered to have been in an accident, so they decided to repair the car using sheet metal repair techniques! If possible, you want to restore the car to a clean state without it having "been in an accident," because if the car is in an accident, the resale value is often significantly lower. Cars that are scratched and dented are restored as if they were new thanks to the brilliant skills of these sheet metal masters!

This video, titled "Magical powder to save the world," was produced by "東京YABAI." KT-POWDER is a water purification agent developed by KAWAICHI-TECH in Katsushika, Tokyo. In the video, they put KT-POWDER into a bottle of muddy water (1 gram per 1 liter of water), put the cap on and shake it, and in no time at all, the mud sinks to the bottom and the water becomes clear! The clear part of this water is also drinkable! It's amazing! KT-POWDER is made from a powder made from a mixture of 10 different minerals. It was created to help children around the world who are in need of clean water, and to help in times of water shortages during disasters.

The Cutting-Edge Robotics Company, FANUC This video, titled "FANUC Product Introduction (Full Version) 2020" (ファナック 商品紹介（フルバージョン） 2020), was uploaded by "FANUC CORPORATION." Have you heard of the robotics company FANUC? FANUC is a Japanese electrical equipment manufacturer that ranks first in the world in sales of robots and peripheral machine products for factory automation equipment. They're located in Oshinomura(忍野村,Oshinomura), Minamitsuru Ward(南都留郡,Minamitsurugun), Yamanashi Prefecture(山梨県,Yamanashiken). FANUC was the first manufacturer to successfully develop Japan's first numerical control device (NC) in 1956, and since then has continued to supply CNC equipment and robots for machine tools worldwide. The name FANUC has grown into an international brand thanks to its advanced technology and service. In this article, we'll introduce a number of exciting and futuristic factory automation products that FANUC will release in 2020! FANUC's CNC Series Source :YouTube screenshot FANUC’s CNC series is a vital product group that serves as the core of its FA products. The world-class CNC series, that increases productivity in manufacturing, uses an interface called iHMI, shown at 1:09 in the video, which is equipped with a high-quality AI that allows users to intuitively manipulate high-level production functions and simultaneous sharing of information regarding maintenance through networking. The FANUC servo motor offers a diverse lineup of motors that meet the needs of a wide range of customers, from small to large, and provides a comfortable manufacturing environment with excellent operability and easy maintenance. The Manufacturing Functions of FANUC Source :YouTube screenshot FANUC's products, which can be seen at 1:40 have earned a worldwide reputation for their machining performance. Even flat surface machining and shaping of complex shaped molds can be done at high speed and with high precision. AI servo tuning uses AI to automate the technology that skilled craftsmen have developed through experience. You can see the AI feed-forward tuning in progress at 3:03 in the video. In addition, the combination of CNC, servo motors, and robots makes it easy to perform complex laser engraving, metal cutting, and welding processes. About the FANUC robots introduced in the video Source :YouTube screenshot FANUC has a wide range of robots in its robot lineup, ranging from a 500 gram payload robot to a large robot with a payload of over 2.3 tons. These can be seen at 4:52 in the video. Cumulative production of FANUC robots has exceeded 640,000 units, making it the world's top producer of robots. Robomachines, its bestselling product so far, is yellow, FANUC’s brand color, but its new series, shown at 6:57, features a green color scheme and is a cooperative robot that stops moving when touched by a person. The Collaborative Robot provides a barrier-free environment for humans and robots to work together, helping to significantly improve workflow. Machines such as spot welding robots, arc welding robots, SCARA robots, handling robots, and Robodrills that incorporate high-precision vision sensors shown at 7:33 and force sensors shown at 7:51, can learn and manufacture products at higher speeds and with greater precision through the introduction of AI functionality. Summary of the Advanced Robotics Company, FANUC Although people tend to think of FA machines and robots as products for large factories, FANUC provides FA products for small and medium-sized companies as well. Its products can be operated via a tablet terminal interface and can be moved by AGVs and dollies. FANUC prides itself on its safe design, and its collaborative robots boast a safety design that does not require protective measures even in small work spaces, as they stop safely when touched by a person. The Japanese manufacturing industry is comprised of nearly 90% small and medium-sized enterprises. FANUC’s FA machines such as its small production processing machine, Roboshot and Robonano are bringing an industrial revolution to modern machining. 【Official Homepage】FANUC CORPORATION https://www.fanuc.co.jp/eindex.html

Introducing SDG Initiatives by Companies in Hokkaido via Video This video, titled "Recycling Scrap Tires to Make New Products! From Hokkaido SDGs to the Future｜WEEK⑤ Broadcast on December 3, 2021" (廃タイヤをリサイクルで新たなモノへ！ＳＤＧｓ北海道から未来へWEEK⑤ 2021年12月3日放送), was uploaded by "HBC News Hokkaido Broadcasting Co." (HBCニュース　北海道放送). This news program introduces companies in Sapporo, Hokkaido that are working on SDGs, in 7-minute video. This article will explain SDGs and introduce the technology to transform scrap tires into a resource, as seen in the video. Learn about the future SDGs through the efforts of a company that has been developing technology to treat scrap tires as a resource for the past 22 years. What Are SDGs? Photo：SDGs The term SDGs refers to "Sustainable Development Goals." They are international goals that aim for a sustainable and better world by 2030, and there are 17 major goals in total. This time, the video introduces goal number 12, "Responsible Consumption and Production," which aims to "ensure sustainable consumption and production patterns." In other words, it is an initiative to reuse scrap tires, which are disposed of in large quantities, by converting them back into recyclable resources. The Sapporo Based Companies That Have the Technology to Turn Scrap Tires Into a Resource Photo：Scrap tires Introduced at the beginning of the video is the aquarium tank at Sunpiazza Aquarium in Atsubetsu, Sapporo. The aquarium's purification system contains special anti-algae/anti-mold pouches that inhibit the formation of algae and mold, which can be seen at 1:13 in the video. The anti-algae pouches make it easier to keep the aquarium clean and reduces the frequency at which they need to be cleaned. The anti-algae pouches are made of crushed anti-bacterial plated film, and this technology originated from the crushing technology of scrap tires. The company that developed the anti-algae pouches is Kotobuki Sangyo of Sapporo, Japan. Kotobuki Sangyo's core business is the manufacturing of roller guides, which are auxiliary devices used in steel mills to stretch steel heated to over 1000℃. The company's roller guides account for about 80% of the domestic market share, but 22 years ago the company decided that it could no longer rely solely on these roller guides and began exploring new avenues of business. The largest percentage of scrap tires are recycled for thermal use as fuel (65%), while repurposing (reuse of rubber) accounts for only 17%. Kotobuki Sangyo has taken on the challenge of recovering scrap tires and recycling them back into useable materials. The tires contain steel wires and mesh, so it was very difficult to develop a technology to remove these and crush the resilient rubber. Kotobuki Sangyo developed a machine specialized in recycling scrap tires, believing that recycling was absolutely necessary to reduce carbon dioxide emissions. Made With Rubber Chips From Recycled Scrap Tires Source :YouTube screenshot Rubber mats (water-permeable rubber sheets) and rubber boots made with rubber chips made from crushed scrap tires are introduced at 5:40 in the video. The rubber boots are made of ultra-fine 0.06 mm rubber powder by utilizing this crushing technology. This recycled rubber can also be used to make new tires. Some manufacturers have begun selling sandals and bags made from scrap tires, as well as crepia powder (クレピアパウダー), antibacterial insoles for safety shoes, and crepia fiber, which are made from scrap tires. How Scrap Tires are Currently Disposed of in Japan Photo：A car tire Scrap tires are industrial waste and cannot be disposed of like regular trash; they must be picked up by a disposal company. In addition to being collected free of charge by dealers when new tires are purchased and replaced, used tires can also be purchased if they are still usable. In addition to the method introduced here (turning scrap tires into rubber chips for reuse), there are other methods which include turning them into recycled oil, metal, and rubber. In addition, "recycled tires," in which only the grooves of the tire are re-covered, have been attracting attention as a way to reduce the amount of scrap tires themselves. These recycled tires are subject to Japan's Green Purchasing Law. Summary of Japan's Scrap Tire Recycling and SDGs The above video, "Recycling Scrap Tires to Make New Products! From Hokkaido SDGs to the Future｜WEEK⑤ Broadcast on December 3, 2021," introduces a company with the technology to recycle scrap tires. Approximately 100 million scrap tires, roughly 1 million tons, are generated every year, and the problems surrounding them are becoming more and more serious. Simply burning and disposing of scrap tires is damaging to the environment and a waste of valuable resources. In order to reduce CO2 emissions, save energy, and conserve resources, it's important to use scrap tires as a resource. If you still haven't yet, be sure to check out the video to learn more about companies and their efforts to turn waste tires into resources.

A Look at Aikido, a Traditional Japanese Martial Art This video, titled “Aikido&Jiu-Jitsu&Ninja techniques - Shirakawa Ryuji shihan,” was released by “Aikido Shinburenseijuku.” Aikido is a martial art that was first developed in the Taisho (1912-1926 AD) and Showa (1926-1989 AD) periods. The history of Aikido began with the study of martial arts by its founder, Morihei Ueshiba. Later on, when Aikido was invented, the number of people practicing martial arts increased rapidly. Today, Aikido is divided into various schools, and many people, from children to adults, practice it at schools in Japan and around the world. Try Your Hand at Aikido, a Traditional Japanese Culture! Photo：Aikido The appeal of Aikido is that it's a martial art where one can learn defensive techniques based on body movements focused on maximizing potential energy and breathing techniques. In order to master Aikido, it is important to learn the techniques one by one through training with other practitioners. In the Japanese martial arts, there is a concept called "心技体" (Shin-Gi-Tai - heart, technique, physique). This refers to the idea of growing while maintaining a balance between mental strength (精神力/heart - 心), skill (技術/technique - 技), and physique (体力, body - 体). When practicing in the dojo, it is important to not only move your body, but also to remember the rules and learn proper etiquette. The Techniques Used in Aikido Photo：Aikido The video introduces techniques such as Shiho-nage, Irimi-nage, Kotegaeshi, Ikkyo, Tenchi-nage, Kokyu-nage, Sumi-Otoshi, and Kaiten-nage. Aikido techniques are created based on scientific analysis of the human body's characteristics and motor skills. Having said that, Aikido is not about competing with others or deciding who wins or loses, so there are no matches or competitions. Summary of Aikido, a Traditional Japanese Martial Art Photo：Aikido Shinburenseijuku introduced in the video is one of the largest dojos in Japan's Tohoku region. There are Aikido dojos and classes all over Japan, making it easy for people to experience the traditional Japanese martial art. If you're interested in wearing an aikido uniform (gi) and practicing traditional Japanese aikido techniques, consider visiting an Aikido dojo in Japan!

Video Introduction of Amazuki Chestnut Production Process at a Popular Amazuki Chestnut Shop in Kyoto City, Kyoto Prefecture This video, titled "Making the Best Sweet Chestnut "AMAGURI" at Kyoto! Japanese Street food, Craftsmanship, Gourmet!," was created by "DELI BALI." This video introduces the sweet chestnut store "Hayashi Monshodo" (林万昌堂) which has been in business since 1874. Hayashi Monshodo is located at the entrance to Shinkyogoku (新京極) in central Kyoto (京都府, kyoutofu). As you can see in the video, a huge amount of chestnuts are roasted here every day. Tianjin Sweet Chestnuts have become a famous soul food of Kyoto. Enjoy watching learning more about Tianjin Sweet Chestnuts in the video. More About Tianjin Sweet Chestnuts Photo：Tianjin Sweet Chestnuts Tianjin Sweet Chestnuts are made from chestnuts of the Chinese Chestnut tree (シナグリ, shinaguri) (scientific name Castanea mollissima), a deciduous tree native to China. Since the astringent bark is not attached to the edible part with tannin like the Japanese chestnut, it's easy to peel off the roasted part with one's hands or utensils. Li Jinzhang (李金章) and Kunijiro Kuki (九鬼国次郎) opened Japan's first sweet chestnut store "Kanemasuya" on November 3rd, 1910 in Asakusa's Nakamise Shopping Street (浅草の仲見世). Chinese chestnuts were originally only grown in China, however, selectively bred species, which differ from the original Chinese variety, are now being grown in both Kochi Prefecture (高知県, kouchiken) and Gifu prefecture (岐阜県, gifuken). These chestnuts are highly disease resistant, much like the Japanese chestnut, and hybrids are currently being created with American and European species to improve their resistance to disease and pests. How Tianjin Sweet Chestnuts Are Made Photo：Tianjin Sweet Chestnuts The process for making Tianjin Sweet Chestnuts is as follows. 1. Roasting From 0:28 in the video, you can see a huge amount of chestnuts being roasted together. They are mixed constantly with river pebbles until they become soft. The river pebbles are great conductors of heat which helps maintain the plumpness of the chestnuts throughout roasting. 2. Sorting From 0:56 in the video, you can see the chestnuts being sorted. Poor quality chestnuts are removed and discarded. This is all done by hand and requires a lot of knowledge and experience to know what to look for. The chestnuts are roasted carefully, with roasting time and methods being adjusted as needed. Once the chestnuts are fully roasted, mizuame is added. The sugar caramelizes producing a beautiful aroma. 3. Inspection From 3:53 in the video, you can see the chestnuts being checked to see how much longer they need to be cooked. The fully roasted chestnuts are separated from the hot river pebbles using a sieve. 4. Sorting From 6:00 in the video, you can see the fully roasted chestnuts being sorted. Small or poor quality chestnuts are removed during this stage. 5. Brushing From 6:38 in the video, you can see the chestnuts being brushed. This process produces a glossy finish. Once this process is complete, the chestnuts are ready to be packaged and sold. 6. Completion From 7:47 in the video, you can see the chestnuts as they're packaged and then lined up in the store ready to be sold. Summary of Hayashi Manshodo's Tianjin Sweet Chesnuts Photo：Shelled sweet chestnuts Tianjin Sweet Chestnuts are fun to peel and delicious to eat! We hope you enjoyed watching the video and learning more about how Tianjin Sweet Chestnuts are made! Tianjin Sweet Chestnuts are higher in calories than Japanese chestnuts, high in fiber, and very filling, making them a very popular snack. If you are interested in trying these sweet, freshly baked chestnuts, they can also be purchased online, so be sure to check out Hayashi Manshodo's website! 【Official Website】Hayashi Manshodo - A Long Established Chestnut Shop https://www.hayashi-mansyodo.jp/en/

The Robot Avatar Orihime This video, titled "Be Anywhere With Your Own Avatar｜A Japanese Venture Developing Robots" (自分の分身でどこにでも　ロボット開発した日本のベンチャー), was released by "BBC News Japan." Have you heard of the robot avatar OriHime(織姫)? This video introduces the robot avatar OriHime that was developed by a startup company located in Mitaka city, Tokyo. The video is about Ory Laboratory that is run by the robot researcher and the developer of OriHime Kentaro Yoshifuji(吉藤健太朗) and the interesting story of how OriHime was developed. Watch the video to learn about Japan’s advanced technology. Why Was OriHime Developed Source :YouTube screenshot Yoshifuji Kentaro developed OriHime from his own experience of feeling lonely while he was hospitalized for a certain period of time. At that time, he thought of a way to allow bedridden people to communicate with others remotely throughout the internet. Yoshioka Kentaro now goes by the name Yoshifuji Ory, and has become a person who is drawing attention from all over Japan and the world. Even Those Confined to a Bed Can Operate the Robot Avatar Orihime! Source :YouTube screenshot Even a bedridden person can operate OriHime remotely by his/herself. It takes a little time to get used to, but using a microphone, speakers, and using the "OriHime eye switch" communication device, even a bedridden person can operate OriHime easily with their eyes and fingers. You can see OriHime being operated at around 1:16 in the video. Expanding Our Capabilities With OriHime Photo：Remote work Orihime is not just for those suffering from illnesses either. It can also be a tool to communicate with family members who are away from home, working remotely, etc. For those who have kids that you sometimes have to leave at home alone, OriHime can be a good tool to check in on them. Besides parenting, it is also useful for children's education, with programs such as OriHime education, OriHime-D, and OriHime children's programming. As Japan's workforce continues to decline, the presence of robot avatars such as OriHime and remote work will grow. Orihime - The Robot Avatar Drawing Attention From All Over the World OriHime is now drawing attention from all over the world. OriHime being an employee of the cafe "WIRED SHIBUYA" in Shibuya made headlines around the world. The uses of OriHime will also expand by improving service staff and robot communicators. The robot is now drawing attention from around the world, and the creator, Yoshifuji Ory, is considering exporting the robot to different parts of the world in the near future. Having the product you created help people not only in Japan but also worldwide is a dream come true. It is precisely because he is taking on such a challenge that the young robotics researcher has attracted so much attention. Summary of the Robot Avatar OriHime Source :YouTube screenshot The video intrioduces Yoshifuji Kentaro, the creator of the robot avatar OriHime. For many watching this video it's probably like seeing the future you dreamed of as a child finally come to life. It will be interesting to see what OriHime, the Japanese robot avatar, has in store for us.

Beautiful 3D Paper Cutting Art! Check out the video "The world of beautiful 3D paper cutting #1" (美しい立体切り絵の世界 #1). Most people would be surprised by the beautify of his works. These 3D paper cutting works are created by the paper cutting artist, Naofumi Hama. 3D paper cutting works offer something different to the plain world of traditional paper artistry. What kind of skills are necessary? Let’s take a look at the secrets of 3D paper cutting. More About 3D Paper Cutting Source :YouTube screenshot 3D paper cutting works are created by folding plain paper cutting works. Extra caution is necessary to assemble minute pieces due to their extreme fragility. In the video clips, you can see various 3D paper cutting works such as roses, pansies, ducks, and ironware. Also other beautiful and delicate art works such as gerbera, Dutch hats, origami cranes, chrysanthemum, and butterflies appear in the video. Be sure to take a look! How to Create 3D Paper Cutting Works Source :YouTube screenshot As you can see from this video clip, it may be difficult for beginners to learn this style of paper cutting. It's recommended to try simple cuts using Origami and a cutter when first starting out. It's okay if you stack the cutout patterns and then carefully cut them with a cutter as well. We recommend purchasing a paper cutting kit in which designs of flowers or animals are included for practice. If you're interested in 3D paper cutting, Naofumi Hama has also written a book on 3D paper cutting (only in Japanese). Summary of 3D Paper Cutting Source :YouTube screenshot There are other famous 3D paper cutting artists besides Naofumi Hama such as SouMa, Ayano Tomoda or Miki Kajita. Please check out the beautiful 3D paper cutting works created by these artists and enjoy the different styles that each of them has to offer. All 3D paper cutting works that appear in this video clip are breathtaking. Be sure to watch the video one again to enjoy its unique world view. 【Official Website】Naofumi Hama 3D Kirie (Paper Cutting) https://naofumihama.com/

This video, titled "Lexus LY 650 Luxury Yacht Launch Video," was released by "Motorward." Lexus, which is featured in the video, is a premium brand made by Toyota Motor Corporation. With fans in Japan and around the world, Lexus unveiled its luxury LY 650 yacht in 2019 in Boca Raton, Florida, USA. The Lexus yacht is around 65 feet (20 meters) long and has excellent sailing capabilities that make for an exhilarating ride. Of course, the stylish exterior of the yacht is also worth noting. The reliable Toyota production system is applied to the production of the LY 650, so you can rest assured that it's of the highest quality.

This video, titled "[Speed Correction + Color Correction] Life in Japan in 1919 Revisited in Color" (【速度修正 + カラー補正】カラー化映像でよみがえる1919年の日本の生活), was released by "Pearbook." This video uses a special technology to colorize old Japanese black and white films using AI. The video shows Japan in 1919, the Taisho period. In addition to scenes of Japanese people wearing kimono, the film also shows scenes of markets and interactions with the Ainu people at that time. It also includes images of tourist destinations that are still popular today, such as Matsushima, Hakodate, and Nikko. The ability to see in color what Japan was like more than 100 years ago, before imaging technology was developed, is quite a groundbreaking development!

This video, titled "Tanaka Hisashige's Myriad Year Clock [Full & HD]" (田中久重の万年時計【Full & HD】), was released by "Kaoru GreenEmerald." This video introduces Hisashige Tanaka's "myriad year clock." Hisashige Tanaka was a Japanese engineer and inventor who lived from the late Edo period to the Meiji period, and later became one of the founders of Toshiba. He has been called the Edison of Japan, Karakuri Giemon, and other names. The myriad year clock shown in the video has seven functions: It features an armillary sphere, shows Japanese time, western time time, day of the week, months, moon phases, and zodiac signs, and is spring-operated. It has an amazing design that, when completely wound once, continues to work for a year without needing to be rewound, and it is said that almost all of its parts were made by Hisashige Tanaka using simple tools.

This video, titled "New! 2018 Golden Kiwi 46" [Longboard]" (New! 2018 Golden Kiwi 46" [ロンスケ ロングボード ]), was released by "Pinky Parl." In the video, you can see the introduction of the new 2018 model of the "Golden Kiwi" by DWELL. Longboards are popular because they are longer and more stable than regular skateboards and allow you to cruise through the streets smoothly. This 2018 model is lighter in weight and makes longboard dancing feel great. The graphics on the grip tape have a variety of designs in addition to the cloud pattern, including a Japanese style pattern, so if you're curious, check out the video and their website to see what it's like!

This video, titled "[Karakuri Box｜Ishikawa Studio] Explanatory Video｜Offertory Box 2." (からくり箱の作り方など紹介。「からくり箱　石川工房), was released by "pokun7144." In this video you can see with your own eyes the amazing offertory karakuri box. It's amazing how many wooden boards are used to open this karakuri box. By the way, "pokun7144" has released several videos about karakuri boxes, so if you are interested in them, you should check them out! If you like traditional Japanese crafts, be sure to check this video out!

This video, titled "The Benefits of Saunas｜The World's First Study Begins" (サウナで「ととのう」ワケ　世界初の研究始まる), was released by "HTB News" (HTBニュース). Most hot springs and public baths in Japan are equipped with a sauna. Many people go to hot springs and public baths to enjoy sauna. The people introduced in the video are members of the Japan Association of Sauna, which was established to study sauna. They go into the sauna after tests to examine brain activity and see how it changes. Sauna has blood circulation-boosting properties, and it is said that by relaxing in them, your body will be readjusted. Spend some quality time in a Japanese sauna, which is both comfortable and good for you. Sometimes you just need to sweat it out!

This video, titled "Jan. 2, 2020｜Yasukuni Shrine｜Scabbard Maker｜Mizuno Miyuki｜Plain Scabbards!" (2020年1月2日「靖国神社」鞘師「水野美行」白鞘実演！), was released by "Kimunao News" (きむなおニュース). In January of 2020, demonstrations by sword sharpeners, scabbard makers and engravers were held at Yasukuni Shrine in Tokyo. Scabbard makers are traditional craftsmen who make scabbards, the cases used to store swords. The scabbard is made from materials such as magnolia, which is split once, the insides are hollowed out, and then the two scabbards are laminated together. The appearance of the scabbard varies according to the design of the sword, from simple scabbards to decorated scabbards. In the video clip, scabbard maker Mizuno Miyuki shows how he creates beautiful-looking scabbards.

This video, titled "Nin Nin★TUBE [Hattori Hanzo Ninja Squad Style - Self-Defense Techniques - Hanzo Edition]" (忍ニン★TUBE　[服部半蔵忍者隊流～護身術～　半蔵編]), was released by "Tokugawa Ieyasu and the Hattori Hanzo Ninja Team" (徳川家康と服部半蔵忍者隊). Tokugawa Ieyasu and Hattori Hanzo Ninja Squad is a group that trains at Nagoya Castle every day to promote "Aichi, the home of the warlords" as a PR team for Aichi's tourism. The self-defense technique introduced by Hattori Hanzo is said to be a ninja art. When someone grabs your wrist, you move your arm toward the back of his or her hand in a self-defense technique. This action makes it difficult for the opponent to grab you (see the video). The trick to this self-defense technique is to quickly rotate your arm around theirs.

This video, titled "Japanese puzzle box 72steps with secret compartment Koyosegi 秘密箱７２＋１回仕掛け　小寄木," was released by "hakonemaruyama." It is thought that the first Japanese puzzle box was made in Hakone at the end of the 19th century. Yosegi-zaiku, a traditional Hakone technique, is used to decorate the box, which needs to be solved to open it. In this video, the box has 72 different mechanism that must be solved in order to open it. The parquet should have been pulled outward at first, but around the 50th mechanism, there's a pushing motion making it difficult for the viewer to understand what's happening at first glance. There was supposedly 72 mechanisms to be solved to open it, but there's one extra at the end!