伝統工芸「箱根寄木細工」紹介動画について こちらの動画は「伝統工芸 青山スクエア」が公開した「手技TEWAZA「箱根寄木細工」Japan Hakone Marquetry／伝統工芸 青山スクエア Japan traditional crafts Aoyama Square」です。 日本有数の温泉地として知られている箱根。 箱根で注目しておきたいものは温泉だけではありません。 日本には昔から伝わる伝統的な文化が存在しており、箱根寄木細工もその中の一つ。 箱根寄木細工とは一体どういう伝統工芸なのか 箱根寄木細工は江戸時代後期に誕生した日本の伝統工芸です。 木目や色彩を活かし、素敵な幾何学模様を作り出すのが特徴的。 長年培われた職人の技術により作られています。 駿府の浅間神社建立に集められた職人の技術が箱根寄木細工誕生の起源です。 箱根には箱根寄木細工を取り扱ったお店がいくつも存在します。 観光に訪れた際はお土産に購入してはいかがでしょうか？ 雑貨や家具等、素敵な品物と巡り会えるかもしれません。 箱根寄木細工以外にも様々な伝統工芸や文化が箱根にあります。 箱根寄木細工の制作工程紹介 動画では原料になる木材をはじめとした箱根寄木細工づくりの要点が非常に分かりやすく約4分程度に収められています。 箱根寄木細工の作業方法 ・種木作り ・木地の説明 ・種板作り ・づく作り ・箱根寄木細工の完成 箱根寄木細工に触れる方法 箱根寄木細工について知識を深めるなら体験教室に参加することをおすすめします。 箱根には箱根寄木細工づくりの教室が存在しており、興味のある方はチェックしておきたいところ。 箱根寄木細工に限らず、日本の文化や伝統工芸に関する教室は全国各地に存在します。 伝統工芸づくりの体験をすることも日本観光の楽しみ方の一つです。 職人技のすごさを実感できる箱根寄木細工 関所からくり美術館 箱根にある箱根寄木細工 関所からくり美術館は職人達が作るからくり箱を展示している美術館。 色々なからくり箱を見ることができるので、日本の伝統工芸や文化に興味がある方やパズルやからくり等に興味がある方は観光プランに入れておくと良いかもしれません。 匠の技を実際に体感したい方はからくり箱の工作体験に一度参加することをおすすめします。 箱根寄木細工を販売している浜松屋 浜松屋は箱根で木工芸品を販売しているお店。 2階の工場では実演見学ができ、匠の技をその目で見ることができます。 秘密箱や引き出し、テーブルウェア等、インスタ映えするおしゃれな商品がもりだくさん。通販で商品を購入することも可能です。 箱根寄木細工紹介まとめ 日本の伝統工芸や文化は調べれば調べる程奥が深いです。 どのような文化があるかを知り、実際に触れてみることが大切。 日本観光の際には様々な伝統文化に触れてみてはいかがですか。

Kirikane - A Traditional Japanese Decorative Technique This video, titled "Japanese Craftsmanship: Japanese Crafts "Kirikane" (Japanese Craftsmanship：日本の匠「截金」), was produced by "Japanese Craftsmanship." It introduces the culture of Kirikane, a traditional Japanese craft. Kirikane is a decorative technique that involves cutting thinly stretched gold or silver foil into small pieces and creating patterns while pasting them to an object. Since ancient times, kirikane has been essential for decorating Buddhist statues and paintings as well as for decorating spirit tablets. Kirikane is an indispensable traditional Japanese technique in the world of Buddhist art. The History of Kirikane, a Traditional Japanese Craft Source :YouTube screenshot It's estimated that kirikane was already being used for the decoration of tableware, Buddhist statues, and decorative boxes in Asian countries in the pre-era (BC). In Japan, too, kirikane came to be used for carving Buddhist statues and making Buddhist paintings from around the Nara Period (710-794) onward. It's only in Japan, however, that kirikane culture has been inherited for traditional crafts despite thousands of years of history. To date, three people, Baitei Saita, Daizo Nishide, and Sayoko Eri, have been designated as Important Intangible Cultural Properties (Living National Treasures) in the art of kirikane. These three kirikane craftsmen were recognized for their mastery of advanced kirikane techniques and their efforts to spread the culture of kirikane. The Traditional Japanese Craft, Kirikane - How It's Made Source :YouTube screenshot Kirikane artisans first create patterns with motifs of nature, plants, and animals, which are then repeated geometrically. They then bake four sheets of foil as thin as 1/10,000th of a millimeter, burn them together, cut them carefully, and attach them according to the prepared pattern. The cutting and attaching can be seen at 0:46 in the video. On top of gold and silver foil, platinum foil is sometimes used for kirikane as well. The skill of master artisans is indispensable in creating beautiful kirikane works of art. Experience Traditional Kirikane Source :YouTube screenshot If you'd like to experience the traditional culture of kirikane, we recommend visiting a shop that sells traditional crafts or checking out a kirikane exhibit. There are many different types of kirikane works of art, such as decorative boxes and tools. Many pieces made using traditional Japanese crafts are expensive, but some of can be found for surprisingly reasonable prices, so be sure to check them out if you're looking for gifts or souvenirs. We recommend attending a class where you can experience traditional Japanese kirikane and learn about the history and techniques of the craft. Summary of Kirikane, a Traditional Japanese Craft Source :YouTube screenshot Kirikane is indispensable to Japanese Buddhist art culture and traditional crafts as a whole. You can see various kirikane works at 1:55 in the video. The appeal of kirikane lies in its elegant beauty. Kirikane works are also available for purchase, so if you're interested in these high-quality items, be sure to check them out.

A Traditional Japanese Craft - Edo Karakami This video, titled "手技TEWAZA「江戸からかみ」Edo Karakami／伝統工芸 青山スクエア Japan traditional crafts Aoyama Square," introduces how traditional Edo Karakami is made. The video was uploaded by "Japan Traditional Crafts Aoyama Square" (伝統工芸青山スクエア). Edo Karakami is a traditional craft that involves decorating Japanese paper in various ways. Washi (Japanese paper) has been closely related to Japanese art culture since ancient times. Check out the video to learn more about the traditional techniques of washi paper that have been handed down in Japan since ancient times. The History of Edo Karakami and Japanese Washi Culture Source :YouTube screenshot The origin of washi dates back to the Heian period (794-1192) when it was used to write waka poems. During medieval times, washi came to be used for decorating fusuma and folding screens, mainly in Kyoto. In the Edo Period, due to the prosperity of the Tokugawa Shogunate, many Edo Karakami were made for Edo Castle and the residences of feudal lords. As a result, many washi artisans emerged and began to produce high-quality Edo Karakami by hand. After the Meiji Period, most of the printing blocks and paper stencils were lost due to earthquakes and air raids, but some of them have been reprinted by craftsmen and still exist today. Traditional Edo Karakami - How It's Made Source :YouTube screenshot Edo Karakami is made through various techniques, such as woodblock printing using woodblocks, textile printing using Ise katagami (pattern paper), brush-dyeing using brushes, and with hand sprinkled gold dust. The designs of Edo Karakami reflect the culture of the Edo Period and the tastes of samurai and merchants at that time. Even today, fusuma and the wallpaper of Japanese-style restaurants and hotels still use the elegant Edo Karakami techniques. In the video, you can see various techniques, including woodblock printing at 0:52, brush painting at 1:06, paint making at 1:47, and woodblock printing at 2:31. Where to Buy Edo Karakami Source :YouTube screenshot Tokyo Matsuya (東京松屋), a long-established maker of Edo Karakami, is a washi wholesaler dealing in fusuma paper and interior washi made by skilled artisans. On top of the large pieces of washi to decorate hotel entrances and guest rooms, Tokyo Matsuya also sells attractive accessories, such as uchiwa fans, ceremonial pouches, and New Year's decorations made of Edo Karakami, so be sure to check out their showroom and online shop. You can see completed Edo Karakami at 4:04 in the video. Summary of Edo Karakami, a Traditional Japanese Craft Source :YouTube screenshot Washi is an industry that has developed alongside Japanese culture since ancient times. In the video, you can see Yukio Koizumi, a traditional craftsman, making beautiful Edo Karakami. We encourage you to incorporate items made with beautiful Edo Karakami, a traditional Japanese craft, into your daily life!

日本の伝統工芸「蒔絵」紹介動画について こちらの動画は「bunkachannel」が公開した「蒔絵―中野孝一のわざ―」です。 日本の伝統工芸で気になるものはあるでしょうか？ 皆さんが思っている以上に伝統的な文化が日本各地に根付いており、今も尚語り継がれています。 今回は蒔絵について紹介している動画をご覧ください。 日本文化が好き、蒔絵に興味がある方は一度チェックしていただきたいです。 蒔絵とは？ 蒔絵は漆器に文様や絵、文字を描いたら金や銀などの粉を蒔いて固めたものです。 蒔絵と一口に言ってもいくつもの技法が存在しており、日本の文化や蒔絵についてより知りたい方は押さえておきたいところ。 蒔絵の種類として ・研出蒔絵 ・平蒔絵 ・高蒔絵 ・卵殻蒔絵 ・肉合蒔絵 ・スクリーン蒔絵 の6種類が存在します。 また蒔絵は重要無形文化財のひとつに指定されており、日本の伝統工芸や文化を勉強する上で一度は触れてみると良いかもしれません。 蒔絵を体験する 蒔絵を体験させてくれるスポットは日本全国にあります。 (1) 京漆器蒔絵体験工房 蒔絵平野 京漆器蒔絵体験工房 蒔絵平野は京都府にある工房です。 蒔絵体験や教室、陶磁器や漆器の修理依頼を行っています。 蒔絵体験では自分で描き上げたオリジナルの漆器を作ることができます。 大体2～3時間の作業で特に定休日は設けられていません。 (2) 加賀 伝統工芸村 ゆのくにの森 加賀 伝統工芸村 ゆのくにの森は石川県小松市にある観光地。 蒔絵をはじめ、輪島塗や友禅、九谷焼など日本の伝統工芸や文化を楽しめます。 蒔絵紹介まとめ 蒔絵はアクセサリーやボールペンなどさまざまなものに使われている日本の伝統工芸のひとつで今も尚語り継がれている文化。 商品によって使われている蒔絵の技法が違うだけでなく、模様も変わってくるのでいくつかの商品と見比べてみるのも楽しみ方のひとつです。

日本文化の尾張七宝をご紹介！ ここでは、日本文化が誇る伝統工芸品の一つである尾張七宝について『手技TEWAZA「尾張七宝」Owari Cloisonne』の動画を元に、ご紹介させて頂きます。 尾張七宝とは、江戸時代後期に、現代で言う名古屋市に当たる『尾張』で『梶常吉作』が作ったのが起源とされています。 日本が誇る伝統工芸品の一つで、現在にまで伝わってきたものです。 1867年には、パリ万博に初めて日本の七宝焼が紹介されました。 様々な技法によって作られている尾張七宝ですが、特に有線七宝という技法が有名です。 まるで七つの宝を散りばめたかのような美しさと模様とデザインの多様さが魅力で、値段も高級な物から手ごろなものまで幅広く、贈り物として多くの人に愛されてきた伝統工芸品です。 その美しさは今回紹介させて頂いている動画でも感じることが出来ます。 現在では、愛知県あま市七宝町を中心に販売や教室が開かれていますが、後継者不足で職人が減りつつある現状となっています。 尾張七宝の制作工程 伝統工芸品である尾張七宝は、日本の文化として江戸時代から現在まで、制作工程がほぼ変わらずに伝わってきました。 工程としては、【素地作り→下絵付け→銀線付け→釉薬差し→焼成→研磨】となっています。 特に、秘伝の調合と専用の施設によって生産をされている釉薬には並々ならぬ拘りがあります。 焼成によって収縮してしまうので、【釉薬差し→焼成】の工程を繰り返さないといけません。 伝統工芸品「尾張七宝」のまとめ 日本の文化において世界に誇ることが出来る伝統工芸の一つである尾張七宝についてご紹介をさせて頂きました。 ぜひ興味があれば、愛知県あま市にも足を運んで見て、実際に日本の文化と伝統工芸に携わってきた職人の匠の技を体験してみて下さい。

宮城県鳴子で作られている伝統工芸「こけし」の紹介動画について こちらは「Esther Bellido」が公開した宮城県鳴子の伝統工芸こけしを実演で製作する様子がご覧になれる動画「Relaxing & Calm - Making a traditional Japanese wooden Kokeshi Doll」です。 こけしとは東北地方で作られている伝統工芸品。 日本へ観光の際にはお土産として購入すりのも良いでしょう。 こちらの動画では職人が匠の技を披露し、こけしを手仕事で作る様子がご覧になれます。 日本の伝統工芸品！こけしの歴史・由来・意味とは？ こけしの起源は江戸時代、東北地方の温泉へ来た観光客にお土産として木の人形「こけし」を販売したのが発祥。 こけしは地域により形に違いがあり、津軽系・南部系・木地山系・鳴子系・作並系・遠刈田系・弥治郎系・肘折系といった多くの種類があり技術・技法も違います。 値段は1000円ほどから高級なものは数万円になります。 芸術品こけしの制作工程 こちらの動画の舞台は宮城県鳴子にあるこけしの岡仁。 ここではこけしを作る様子を実演で見ることができます。 近年では、こけしは可愛いと、若い女性や訪日観光客を中心に人気となり、ブームとなりました。 インテリアとしてこけしを自宅に飾る人も。 こけしの製作の工程は0:26からご覧になれます。 こけしの原料となる原木を切る玉切り。 次に余分な木を切る木取り、木地挽きという作業では回転させて削っていきます。 最後はカンナで仕上げ挽きをして、形が出来上がったら絵付け。 高速で回転するこけしに丁寧に色をつけていきます。 鳴子のこけしの特徴は蝋引き（ろうひき）をすること。 蝋引きをすることで色が鮮やかになります。 頭と胴体を別々に作製したものを、最後に頭と胴体を繋げ作品の完成。 宮城県鳴子で伝統工芸のこけしを楽しむ！ 鳴子には多くのこけし職人がおり、職人によって技法・作り方も独自のものであり、こけしも作る人によって形が違うとも言われています。 日本の伝統工芸品「こけし」紹介まとめ 今回は日本の伝統工芸品のこけしの制作風景の動画を紹介いたしましたが、一つ一つが手作りだということがわかったと思います。 また、今回動画で取り上げたこけしの岡仁はお店でこけし作りの体験ができ、通販サイトで商品の販売をしています。 こちらの動画では4分ほどでこけしづくりの職人の技を感じることができます。 日本の伝統工芸品「こけし」の魅力をこの動画で堪能ください！

日本の伝統工芸「房州うちわ」プロモーション動画について こちらの動画は「IKIDANE NIPPON」が公開した「Boshu Uchiwa: the making of a hand fan」で千葉県房総半島の館山市・南房総市を中心に伝わる房州うちわを紹介しています。 こちらの動画をご覧になれば日本のうちわ文化と、房州うちわが一つ一つ手作業で作られていることを知ることができます。 うちわは日本に古くから伝わる伝統工芸品であり、気軽に持ってかれるお土産です。 こちらの記事では日本が誇る伝統工芸「うちわ」文化の魅力を動画に沿って解説します！ 日本の文化うちわと房州うちわの歴史 うちわの起源は古く中国やエジプトの絵にも書かれ、2000年ほど前の弥生時代に日本へ伝わりました。 また、房州うちわの歴史は元々、江戸で作られていた江戸うちわが戦争により被災し、千葉の房総半島へ移ったのが始まりだとされています。 日本の伝統文化「房州うちわ」と日本のうちわ文化 房州うちわとは京うちわ、丸亀うちわと並び日本三大うちわとして多くの人に愛されています。 房州うちわの特徴は女竹を原料として使用し、丸柄に仕上げている点です。 それに比べ、丸亀うちわは男竹で挿柄を使用するのが特徴。 他にも日本の特徴的なうちわの種類として江戸うちわもあり、藍染めで貼り文字を使って作られています。 日本の伝統文化「房州うちわ」の特徴 房州うちわは房州うちわ振興協議会が中心となり現在でも盛んに生産され、1984年には千葉県指定伝統的工芸品に指定されました。 千葉県には現在も数多くの工房があり、うちわ職人が丁寧にうちわ骨から作っています。 代表的な工房は太田屋・宇山工房、房州堂です。 工房では手仕事でそれぞれの工房の技法で大きさも柄も少し違う作品となっています。 また、道の駅やお土産屋さんでも房州うちわは販売され、作られる工房によって作り方や柄も違います。 うちわは日本の文化が今に残る芸術品と言っても過言はないでしょう。 日本の文化！伝統工芸品「房州うちわ」のを作る21の工程 房州うちわには材料を用意してから21の工程があります。 最初に竹の切り出しから始まり、皮むき、磨き、水付け、割竹、もみ、穴あけ、編竹、柄詰め、弓削、下窓、窓作り、目拾い、穂刈り、焼き、貼り、断裁、へり付け、下塗り、上塗り、仕上げをして完成。 この一つ一つの工程を職人が丁寧に匠の技を屈指してつくりあげています。 日本の伝統工芸品「房州うちわ」の文化と魅力のまとめ 千葉県の房州うちわを紹介させていただきました。 こちらの動画では4分ほどで房州うちわの生産の工程をご覧になれます。 訪日観光の際には、伝統工芸品の房州うちわの作成を体験したり、購入されてみるのも良いでしょう。 それでは、日本の伝統工芸品「房州うちわ」の魅力をこの動画でご堪能ください！

Japan's Traditional Embroidery Restoration This video, titled "Nippon Teshigoto Zukan x Wakoh-sha" (ニッポン手仕事図鑑 × 和光舎), was released by "Nippon Teshigoto Zukan" (ニッポン手仕事図鑑). It introduces the embroidery restoration workshop "Wakoh-sha" in Kyoto City, Kyoto Prefecture. Wakoh-sha is a company specializing in the cleaning of robes worn by monks in Kyoto City, Kyoto Prefecture. After cleaning these robes for a while, they also began to restore the embroidery of "uchishiki," patterned cloth laid on a table or Buddhist altar. This video introduces the work of an embroiderer who specializes in embroidery restoration, a craft rarely seen by the general public. A Closer Look at the Traditional Embroider Restoration of Wakoh-sha Source :YouTube screenshot The uchishiki, a cloth used at Buddhist temples and in Shinto rituals, is what is being restored in the video. Embroiderers carefully cut out the embroidery that was beautifully applied more than 100 years ago, transfer it to a new cloth, and restore the frayed embroidery to its original form, playing an important role in allowing it to be passed down to the present generation. You can see the frayed embroidery before and after repair at 1:55 in the video. Nihon Shishu (日本刺繍), a traditional Japanese craft that restores embroidery, embroiders patterns such as flowers and birds on silk using silk thread, gold thread, and silver thread, and is a historical decorative technique that is also used for decorating kimono and obi. This type of embroidery restoration involves re-stitching gold thread or stitching new thread. This video shows how the embroidery artisans use traditional Nihon Shishu techniques, such as Sagara-nui and Matsuri-nui, without using adhesives, in order to "connect the beauty of the past to the present. The Embroidery Artisan Supporting Traditional Japanese Crafts Source :YouTube screenshot Hisamitsu Imamura, an embroiderer introduced in the video, is still moved by traditional Japanese embroidery, despite being 80 years of age and is trying to improve his techniques. He also focuses on training young embroiderers so that they may inherit Japan's traditional embroidery techniques. The embroiderers who work in the workshop, both experienced artisans and beginners, learn while feeling the beauty of Japanese embroidery, and by repairing it, they find reward in being able to preserve the past. Summary of Japan's Traditional Embroidery Restoration Source :YouTube screenshot No two embroidery restorations are the same; each piece is a once-in-a-lifetime work whose composition changes depending on the condition of the embroidery and the damage the fabric has sustained. As you can see at the end of the video, the delicate work of the embroidery artisans, who put their hearts and souls into each and every stitch, are connecting the beauty of the past to the present.

日本の伝統工芸螺鈿職人紹介動画 こちらの動画は「ニッポン手仕事図鑑」が公開した「螺鈿職人になる旅 / 武蔵川工房」です。 螺とは螺旋状の殻をもつ貝のことを指し、鈿とは金属や貝による飾りのことを指します。 アワビやヤコウガイ（夜光貝）シロチョウガイ（白蝶貝）クロチョウガイ（黒蝶貝）カワシンジュガイ（青貝）などの材料で幾何学模様を刻むという点で、螺鈿（らでん）は蒔絵や卵殻などとは異なります。 貝の厚さは0.4～1㎜で花鳥風月のデザインを刻むという点でも日本の伝統工芸らしさが際立ちます。 日本有数の伝統工芸螺鈿職人として最も有名な方が、動画で紹介されている武蔵川工房の親方である武蔵川剛嗣さんです。 螺鈿職人を育てた高岡漆器という日本の伝統 日本の伝統工芸である螺鈿職人を育てた歴史背景には、高岡漆器という日本の伝統工芸があります。 高岡漆器の特徴は町人文化のなかで日用品へ職人たちが技術を磨くため漆を塗り、それぞれの技法を乗せたという起源があります。 それらの匠の技として、象嵌という技法が挙げられます。 これは一つの材料に異質の原料をはめ込む種類の作り方で作られた美術品や工芸品を言います。 明治時代になると石瀬松次郎が青貝螺鈿加飾という伝統工芸漆器を始め、青貝塗という日本伝統文化を広めました。 やがて伝統工芸として螺鈿師という立場が確立され、武蔵川工房の武蔵川さんは国指定の伝統的工芸品の認定者となります。 螺鈿は光の加減によって様々な色に映るため、武蔵川工房では暑さを0.1mmまで削り加飾を行います。 高岡漆器独自のこの工程を踏むのが武蔵川工房様の特徴でもあります。 貝の輝きをいかに引き出し、コントロールできるかが伝統工芸を作る螺鈿職人の腕の見せ所であるとも言えます。 現代に活きる日本の伝統文化・螺鈿 現代においても螺鈿職人は様々な工夫を凝らして螺鈿の文化を進化させています。 ペーパーウェイトや帯留め、髪飾りや箸、時計やガラスに細工された螺鈿の作品は見ているだけでも楽しいものばかりです。 武蔵川工房でも皿や飾箱、茶器などへの螺鈿装飾を行ったものが多く制作されています。 動画では2:24よりご覧になることができます。 スマートフォンケースやスマートフォンリングといった現代の生活に即した螺鈿作品を作る螺鈿職人もいます。 日本の伝統文化螺鈿職人紹介まとめ 螺鈿職人は日本には数多くいますが、高岡漆器の歴史を組む武蔵川工房の螺鈿作品は他に類を見ない美しさを持っています。 ぜひ日本の富山県へ訪れた際には螺鈿にも触れてみてはいかがですか。

大阪の「佐竹ガラス」紹介動画について こちらの動画は「ニッポン手仕事図鑑」が公開した「ニッポン手仕事図鑑 × 佐竹ガラス」です。 日本には数多くの伝統工芸が存在します。 作品1つ1つに職人が長年培ってきた技術や苦労が詰まっています。 日本観光をする際は芸術品や伝統文化などに触れてみるのも楽しみ方の1つです。 今回は大阪府和泉市で日本の伝統工芸を守り続けている佐竹ガラスについて紹介します。 大阪の「佐竹ガラス」紹介動画の内容 「ニッポン手仕事図鑑 × 佐竹ガラス」は大阪府和泉市にある佐竹ガラスの佐竹保彦氏へのインタビュー動画。 大阪府和泉市は人造真珠が作られていたことでも有名で、佐竹ガラスも人造真珠の製造に関わっていたことが佐竹保彦氏の口から語られます。 佐竹ガラスの職人が1本の棒を使ってガラスワークを行うシーンは動画の見どころの1つ。 2001年4月に主屋などが登録有形文化財に登録されました。 魅力的なガラス工芸の数々 佐竹ガラスは多くの種類の伝統工芸品を世に送り出しています。 色鮮やかなガラスロッドを筆頭に大阪府和泉市信太山のガラス職人が考案したホタル玉やとんぼ玉、ガラスビーズといったものが挙げられます。 大阪の「佐竹ガラス」紹介まとめ 何十年という時代の中で数多くのガラスロッドやアクセサリーパーツなどを作っている佐竹ガラス。 皆さんが思っている以上に日本の伝統工芸や美術品の世界は奥が深いです。 これを機に日本伝統の文化や歴史などを勉強してはいかがでしょうか？

越前打刃物の起源と歴史 こちらの動画は「明日への扉 by アットホーム」が公開した「#070 越前打刃物職人 田村 徹　|　明日への扉 by アットホーム」です。 日本の福井県越前市には昔より刀剣を製造していた歴史があり、その技術が越前打刃物という伝統文化工芸に生かされています。 打刃物とは鉄を打って作る刃物のことで、1337年に千代鶴国安によって作られたとされています。 千代鶴神社にその文献が残され、以降700年もの長い間、職人の手によって受け継がれました。 越前打刃物は1979年には国の伝統工芸品として認定されます。 越前打刃物とは産地福井県越前市において700年の歴史と伝統がある刃物です。 型を抜いて作るのでなく、熱した鉄を打つことで一つの作品を製造するという特徴があります。 日本の伝統文化工芸を受け継ぐ若き越前打刃物職人・田村徹 そんな伝統文化工芸である越前打刃物の職人として修行し若き力を注いでいるのが、動画紹介されている田村徹さんです。 田村徹さんが現在師事しているのが、黄綬褒章も受賞した偉大なる師・清水正治さんです。 日本の伝統文化工芸を守る名工清水さんの最も有名な刃物が鮪包丁です。 刃渡り100センチ以上にもなる包丁を作れるのは日本でも数えるほどしかおらず、その匠の技と技法は唯一無二で伝統文化そのものと言えます。 清水正治さんの手仕事はメディアはもちろんのこと、多くの知識人からも支持されており清水正治さんの打刃物でなければならないと語る職人も多くいます。 日本の伝統文化工芸越前打刃物に挑む若き職人 弟子である田村徹さんが今回の動画の中で製作しているのは出刃包丁です。 その材料となるのは地金と鋼です。 包丁の種類は大きく分けて両刃と片刃という種類に分けられ、その用途によって研ぎ方を変えています。 動画の中では6:30より解説されています。 まずは工房の高温の炉のなかで柄に差し込む部分を作る中子取りという作業を行います。 その後、焼入れという工程で800度の窯から一気に冷水で冷やします。 柿色と言われる色合いまで加熱を行うとても繊細な作業です。 そして研師によって刃付け（研ぎ）という作業を行います。 完成した包丁は、もはや芸術品・美術品の一つとしても過言ではないほどの美しさと精巧さを備えたものとなります。 日本伝統文化である越前打刃物は包丁などの調理用品だけでなく、鎌など農業や林業、園芸にも用いられています。 日本伝統文化工芸越前打刃物紹介まとめ 越前打刃物という歴史ある日本伝統工芸作品を今まで以上に身近に感じることができたでしょうか。 毎日使用する包丁だからこそ、日本伝統文化である越前打刃物に触れてみてはいかがでしょうか。

伝統工芸「京指物」紹介動画について こちらの動画は「伝統工芸 青山スクエア」が公開した「手技TEWAZA「京指物」kyo-sahimono joinery／伝統工芸 青山スクエア Japan traditional crafts Aoyama Square」です。 多くの観光客が訪れる京都には京指物と呼ばれる伝統工芸があります。 京都観光を楽しむ方は是非チェックしてください。 京指物とは一体どのように作られるのか 1つの京指物ができるまでにいくつもの制作工程があります。 動画をご覧になれば素材選びから完成までのイメージを掴めるのではないでしょうか。 まずは素材となる木を乾燥させ、荒木取と呼ばれる木の余分な部分を切り落とす工程が行われます。 続いてに木を矯正・荒削りして状態を整えたら仕口ホゾ接ぎと呼ばれる工程に移ります。 微調整しながら組み立てていくのがポイントです。 加工された部分に接着剤を塗って接合した後、平鉋(ひらがんな)で滑らかさや丸みを出す仕上削りが行われます。 その後、表面を研磨する仕上加工と呼ばれる工程で木の特長を引き出します。 最後は文様などを付ける加飾加工を行えば京指物のできあがりです。 気になる京指物の作品 京指物は茶道具をはじめ、桐箱や米櫃、調味料入れ、おちょこなどがあります。 通販サイトでは、いろいろな京指物が販売されているので、きっとお気に入りの作品が見つかるでしょう。 京指物紹介まとめ 京都は多くの観光客で賑わっており、日本の伝統工芸や歴史などを勉強するなら一度は訪れたい場所です。 今回紹介した動画をきっかけに日本の伝統工芸や京都について興味を持ってもらえれば幸いです。

About the Edo Sashimono Introductory Video This video, titled "Edo Sashimono, Traditional Furniture Made Without Using Nails - Tokyo Craftsman" (釘を使わない伝統の家具 東京職人「江戸指物」), was released by "Kyodo News." In Japan, there is a traditional way of building, creating furniture, and woodworking without using a single nail. This woodworking technique is called "sashimono" and has a long history dating back to the Heian Period (794-1185). Professionals who build Japanese shrines are called Kudenshi (宮殿師, "Buddhist altar craftsmen") or Miyadaiku (宮大工, temple carpenters), and it is said that the methods for crafting Edo Sashimono were inherited from these craftsmen. The origin of the name "sashimono" comes from fitting wood together (指, "sashi" means "put into"). You can see the female Edo Sashimono furniture craftsman "Motoko Kawauchi," who works at a workshop in Higashi-Nippori, Arakawa, Tokyo, in the video, carefully carving the mortice and tenon so that the dresser can be put together tightly. One can see that when the boards are put together, they fit together in a very satisfying way, creating a sturdy dresser. You can see a close look at the mortises at 1:02 in the video. Traditional Sashimono Craftsman Source :YouTube screenshot Unlike ordinary furniture craftsmen, Edo Sashimono, which is inherited from the advanced woodworking techniques of traditional Japanese craftsmen, the people who specialize in this are called "Sashimonoshi" (指物師). The history of the sashimonoshi is long, and it is said that it was during the Muromachi Period (1336-1573) that the techniques began to be passed down for a profession. The main crafts of Edo Sashimono consists of chests and shelves. Since ancient times, sashimono were used by noble houses and aristocrats in Kyoto and in the Edo Period (1603-1868), when they became the purveyors to the Tokugawa Shogunate, many sashimono craftsmen were invited to Edo, and the furniture they made became so popular that it became indispensable to samurai life. Many Edo sashimonoshi lived in the current Taito Ward, which was lined with daimyo residences. From the remnants of those days, Edo Sashimono workshops are still concentrated around Tokyo's Taito Ward. Characteristics of the Edo Sashimono, a Traditional Japanese Craft Source :YouTube screenshot The characteristic of Edo Sashimono is the texture of woodwork furniture that makes the best use of the beauty of the wood grain. Also, because no nails are used, the appearance is clean and beautiful, and you can see from the video that the craftsmanship is utilized on all parts of the furniture. Edo Sashimono carves mortises and tenons so that the wooden joints cannot be seen from the outside when putting them together, because of this, the less you can see them, the higher the level of craftsmanship. Looking at the finished product of Edo Sashimono, you can see a glimpse of the simple and sturdy spirit of the craftsmen of the Edo Period. As shown at the end of the video, when you press one drawer, a different drawer pops out; which is evidence that the inside of the chest is very airtight because the wooden joints fit tightly together. The mortises are carved in such a way that if you put something in a drawer, the weight of it will prevent it from popping out. Edo sashimono craftsmen have passed down the traditional Japanese techniques to the present, from the selection of mulberry, zelkova, and paulownia wood to methods for assembling different pieces. You can see the beautiful completed wardrobe, like a work of art, from 3:03 in the video. Summary of Edo Sashimono, a Traditional Japanese Craft Source :YouTube screenshot In this article, we introduced Edo Sashimono, a traditional Japanese craft, alongside the video. When you go sightseeing in Japan, consider checking out an Edo Sashimono Exhibition and experiencing Edo Sashimono and the craftsmanship of traditional Japanese culture! 【Official Website】Edo Sashimono - Traditional Crafts | Taito Ward Official Traditional Crafts Site https://craft.city.taito.lg.jp/craft/893/

Ome City, Tokyo "Ome Sightseeing" Video Introduction This video, titled "Ome, Tokyo｜Tourism PR "Another World Just an Hour the Heart of Tokyo｜Long ver." (東京青梅 観光PR「都心から約１時間の別世界」長編 Ome City Tokyo Long ver.), was uploaded by "Ome Blue｜Ome, Tokyo Sightseeing Video Channel" (Ome Blue 東京青梅 観光動画チャンネル). The city of Ome, located just an hour from Tokyo, is an otherworldly place surrounded by nature. Check out the video to learn about the joy of sightseeing in Ome, including traditional indigo dyeing experiences, delicious gourmet food, and activities that you can enjoy in the surrounding nature of Ome. Ome – Just 1 Hour From the Heart of Tokyo Photo：Mt. Mitake, Ome, Tokyo Ome, Tokyo, located in Japan's Kanto region, is located in the northwestern part of the Tama area, just one train ride from Shinjuku. Despite being within day-trip distance from central Tokyo, the city boasts spectacular natural beauty. There are many sightseeing spots in Ome, including Mt. Mitake, where visitors can enjoy hiking, Okutama, a place with breathtaking seasonal scenery, and Mitake Gorge, where visitors can enjoy a variety of aquatic activities. Ome is also home to many culinary delights, featuring dishes made using local vegetables and sake made from the famous water of Okutama, which will satisfy both your stomach and your spirit. With the Aizome Experience (indigo dyeing experience), visitors can try their hand at making Omejima, a traditional textile of Ome that has been produced since Edo-period Japan. You can also see the indigo-dyeing experience in the video via the below timestamp. [Video] 2:33 - Indigo-Dyeing Experience Ome is a great place for sightseeing, as visitors can enjoy nature, recreational activities, gourmet food, culture, and more. Highlights and Sightseeing Spots in Okutama, a Place Surrounded by Mountains Photo：Autumn leaves at Lake Okutama, Tokyo Okutama is a must-visit place if you're sightseeing in Ome, Tokyo. In the Okutama area, visitors can enjoy exciting activities in a scenic natural setting. Lake Okutama, with its beautiful rural scenery, is popular for hiking, as it offers different scenery in each of Japan's four seasons. SUP (stand-up paddleboarding) is another activity that can be enjoyed at Lake Okutama, and allows visitors to ride a board on the quiet surface of the lake. You can also rent a bicycle and enjoy trekking through the mountains of Okutama. Hybrid electric bikes are also available for rent, so even those who are not confident in their stamina can enjoy trekking in Okutama comfortably. [Video] 2:20 - Activities in Okutama Leaving Lake Okutama and moving to the Nippara area, you'll find the Nippara Limestone Caves, a sightseeing spot created by Mother Nature. The Nippara Limestone Caves are the largest limestone caves in Japan's Kanto region, and there are many attractions to see within the caves, including Buddhist statues and giant frog-shaped rocks. The temperature inside the cave is around 11°C year-round, making it cool in summer and comparatively warm in winter, making it a pleasant place to walk around. The Tama River, Mt. Mitake, and Other Highlights – Explore the Beautiful Views of the Mitake Gorge Photo：Gyokudo Art Museum The Mitake Gorge hiking course, which starts at JR Ikusabata Station and takes you along the Mitake Gorge Trail to visit tourist spots, can be completed in about an hour and a half on foot. You can also take a break from hiking and stop by the Ozawa Sake Brewery for a sake tasting. [Video] 0:48 - Ozawa Sake Brewery Sake Tasting Mitake Gorge is also known for its beautiful autumn foliage, and in the fall, visitors can stroll along the clear streams enjoying while admiring the changing of the leaves. Mitake Gorge also offers a variety of water-based activities, such as canoeing and rafting. Whether canoeing down the river in the great outdoors or enjoying a thrilling rafting session, you're sure to experience the beauty of the Mitake Gorge. [Video] 2:12 - Canoeing and SUP in Mitake Gorge Musashi Mitake Shrine, a Power Spot at the Top of Mt. Mitake Photo：Musashi Mitake Shrine at the summit of Mt. Mitake Mt. Mitake has long been worshipped as a sacred mountain, and Musashi Mitake Shrine, said to be a power spot, is located at the summit of Mt. Mitake. The guardian deity of the shrine is the Japanese wolf Oguchimagami, also known as O-Inu-sama. The eyes of O-Inu-sama, which are depicted on a talisman with the power to ward off fire and protect against theft, are in the shape of a crescent moon. [Video] 1:36 - Musashi Mitake Shrine Along the mountain path leading to Musashi Mitake Shrine, there is also an ancient zelkova tree, which legend has it was planted by Yamato Takeru during his expeditions to the east. Check out the video for a close-up of the zelkova tree. [Video] 1:18 - The Jindai Keyaki Zelkova To get to Mt. Mitake, first take the Nishi-Tokyo Bus from Mitake Station on the JR Ome Line to Takimoto Station on the Mitake Tozan Railway. Walking from Takimoto Station to Mt. Mitake takes about 60 minutes, so we recommended taking the cable car to Mt. Mitake. Be sure to check out the scenery from the cable car as well. [Video] 1:09 - The Takimoto Station Cable Car Mt. Mitake also offers easy hiking courses that can be enjoyed by both children and the elderly. Please check the Mitake Tozan Railway website for information on various courses. Summary of Ome, Tokyo Sightseeing If you still haven't watched the video yet, be sure to check it out, as it's filled with all the charms of Ome. Ome is a place rich in natural beauty, but it is also a place where you can enjoy old-fashioned Showa-retro atmospheres. The Showa Retro Goods Museum exhibits candy shop packages and posters from Japan's Showa period, and is sure to be a memorable experience. It's a great place for Instagrammers and photographers as well. The museum also serves delicious food, which is a must when sightseeing in Ome. Mayugura, which has a gallery attached to it, serves nutritious and well-balanced meals centering on seasonal vegetables. The plum manju (steamed buns) at Kobaien, a plum confectionery, are perfect as souvenirs. You can also enjoy them inside the restaurant, which also has a tatami room. [Video] 2:48 - Plum Manju and the Showa Retro Goods Museum A trip to Ome, Tokyo, will leave you feeling like you're in a different world. We hope you enjoy a satisfying sightseeing trip to Ome that will stimulate all 5 senses! 【Official Website】Ome City Website https://www.city.ome.tokyo.jp/ 【TripAdvisor】Ome, Tokyo https://www.tripadvisor.com/Tourism-g1060902-Ome_Tokyo_Prefecture_Kanto-Vacations.html

Video introduction of the maki-e process of a maki-e artist in Wajima City, Ishikawa Prefecture, Japan! What is Makie? This video, titled "Maki-e Time Lapse ART iPhone 6 Case "Zelkova," Lacquer Application, Wajima Lacquer, Maki-e, Goldfish, How to" (Maki-e time lapse ART iphone６ケース「欅」拭き漆 輪島 蒔絵 金魚 工程 A process), was released by "no to char." It's a promotional video that shows Japan's traditional Maki-e lacquerware process in a timelapse. The video shows how Mitsuru Yamashita, a lacquer artist from Wajima City, Ishikawa, who is famous for producing lacquer, paints a beautiful goldfish on an iPhone case made of zelkova. It looks real enough to swim away! Maki-e, a traditional Japanese craft, is a lacquerware technique, that has been handed down since ancient times in Japan. It's a decorative technique that involves drawing a pattern on lacquerware or wood with lacquer or applying metal powder such as gold, silver, and tin on it before it dries. Lacquer is a natural paint made from the resin of plants of the Anacardiaceae family and has a culture and history of being used in architecture, furniture, stationery, etc. in Japan. Lacquered products are manufactured by division of labor, and the craftsmen who apply the decorative Maki-e designs are called "Maki-e-shi" (蒔絵師). In this video, you can see the techniques of the lacquer artist and the time and process required to make the Maki-e goldfish on the iPhone case. In recent years, "Maki-e" products are seen not only as traditional crafts, but products with Maki-e on ballpoint pens, fountain pens, accessories, stickers, etc. have become common as well. These are objects that can be used daily in modern life and are a way to implement a part of Japanese culture and traditional Japanese crafts into your everyday life. Maki-e, A Traditional Japanese Craft: How It's Made Source :YouTube screenshot In this video, they begin by designing the goldfish, which can be seen from 0:07 in the video, then copying the sketch called an "Okime" on the zelkova iPhone case, applying lacquer with a Maki-e brush, and then sprinkling it with metal powder and then drying it. At the end, they apply "fuki urushi" (wiping lacquer) to the zelkova iPhone case in order to finish it with a beautiful glossy transparent wood grain. You can see the beautiful shining Maki-e design and the finished product, from 1:54 in the video. The finished lacquer gives off a beautiful luster, and you can experience the beauty of traditional Japanese Maki-e and the magnificence of handicrafts in Japanese culture. Maki-e is categorized into several types depending on the process used, including "Hira Maki-e," "Togidashi Maki-e," "Taka Maki-e," and "Shishiai Maki-e." The technique that is seen in the video is "Taka Maki-e" and the lacquer is raised to draw a pattern and express it in a relief shape. The goldfish that rises smoothly from the wood is three-dimensionally expressed by the unevenness of the lacquer, and it is characterized by the deep color of the lacquer that has been applied many times. Summary of Maki-e, A Traditional Craft That Conveys Japanese Culture Source :YouTube screenshot Maki-e is said to have originated in the Heian period (794-1185), and it is an aspect of Japanese culture and traditional crafts with a long history. There are also national treasures that have been made using Maki-e techniques, and it is one traditional craft that should be protected as a traditional technique that conveys Japanese culture. Videos like this, where we can learn about traditional Maki-e techniques and how to use them, are important in passing down the traditional craft to future generations so they may cherish it like their ancestors did before them.

Check out This Video Introducing Uetsu Shinafu, a Traditional Japanese Crafts! This video, titled "Handmade Crafts "Uetsu Shinafu Weaving" / Japan Traditional Crafts Aoyama Square," introduces uetsu shinafu. The video was uploaded by Traditional Crafts Aoyama Square. Uetsu shinafu fabric is the oldest fabric in Japan woven using tree bark fibers. They were first created during the Jomon period (14,000 BC to 400 BC), and are counted as one of Japan's Three Ancient Woven Fabrics. Today, uetsu shinafu is produced in Tsuruoka, Yamagata Prefecture, the Sekigawa District of Uzen, as well as Murakami, Niigata Prefecture. In 2005, these uetsu shinafu products were designated Traditional Crafts by the Ministry of Economy, Trade and Information. In this video, the production process of uetsu shinafu is introduced in detail. Do enjoy this video showing a tradition of Japan from days past. What Is Uetsu Shinafu? Introducing the Production Process and Methods Used to Make Them Source :YouTube screenshot The raw material of uetsu shinafu is bark derived from the Japanese Linden Tree, as shown from 0:33 in the video, with other sources being the bark of the, tilia maximowicziana, as well as the tilia noziricola. Firstly, the bark is peeled and dried, then boiled in water containing wood ash. Next, as shown in the video, the fibers are scrubbed in a river then dried once more. Following that, the fibers are shredded by hand into thin threads in a process called shinasaki. These threads are then joined to form one long thread in a process called shinaumi. Then, the threads are twisted into a spool and called shinayori . The skill of the craftsman is critical in this entire process, as it is all done by hand. Lastly, the threads are placed on a platform known as the uttate, and the threads are then reeled (3:26). Finally, the threads are woven into a piece of fabric. Where Can You Purchase Uetsu Shinafu Products? Source :YouTube screenshot From 4:19 in the video, works created using uetsu shinafu fabric are introduced. Different kinds of bags, decorative items such as tapestries, name card holders, wallets, obi sashes, hats, fabric dividers – there is a wide variety of products. Besides tourist areas in Yamagata Prefecture, uetsu shinafu products can also be purchased through mail order. As for those who would like to try their hand at uetsu shinafu, the Uetsu Shinafu Promotion Council (振興協議会), the Shinaori Center (織センター), or Sekigawa Shinaori Village (関川しな織の里ぬくもり館) are all places you can visit. Summary of Uetsu Shinafu Source :YouTube screenshot Uetsu shinafu: exquisite works of art with a pleasant texture. Isn’t it unbelievable that its origins date back to the Jomon period thousands of years ago? As shown in the video, uetsu shinafu fabric is created through a complicated process, with the craftsmen ensuring that every single step is done to the best of their ability. Thus, uetsu shinafu products can be used for a long time. If this video has you interested in uetsu shinafu, do take the opportunity to purchase an uetsu shinafu product or try an uetsu shinafu experience in Japan! 【Official Website】Uetsu Shinafu Promotion Council Yamagata Prefecture-Tsuruoka City・Niigata Prefecture-Murakami City, Ancient Fabrics Village http://shinafu.jp/

An Introduction to Edo Furin Wind Chimes This video, titled "Edo Furin – Let the sound of the wind chimes refresh you" (江戸風鈴～音色で涼しさを感じる～), was created by "Japan Video Topics." It's an introductory video showcasing the traditional Japanese glass wind chimes "Edo Furin" (江戸風鈴). This video answers the following questions: ・What are "Furin" (Japanese wind chimes)? ・What are the origins of "Furin"? ・How are Edo Furin made? Back when there was no air conditioning in Japan, people thought of many ways to feel cool and refreshed in the heat of summer. Bamboo screens called "sudare" were used to block out the sunlight and water was sprinkled on the ground to cool down the pavement outside of one's home. Furin were another item created to help deal with the summer heat. Wind chimes are often hung from the eaves of one's home, and when the wind blows they create a beautiful melody that makes you feel cool and refreshed. This article and video will introduce "Edo Furin," a type of Japanese wind chime made of glass. Be sure to watch the video to learn more about what exactly Edo Furin are and how they're made. What are "Edo Furin"? Photo：Japanese traditional craft Edo Furin Edo Furin are made today using the same techniques that were used 300 years ago (during the Edo period (1603AD - 1868AD)). Furin (wind chimes) date all the way back to the 7th century in Japan. They were often hung from the eaves of temples and were at the time referred to as "Futaku" (風鐸). Futaku were made of metal and were believed to prevent natural disasters. Nowadays, Furin are available in a variety of shapes and colors. In 1965, Yoshiharu Shinohara (篠原儀治) came up with the name "Edo Furin" for the glass Furin he had been taught to make from previous generations. The glass Furin, which are made completely by hand and without using any sort of mold, are known for the characteristic sound they produce. The Process of Making Edo Furin: Photo：How Edo Furin, a traditional Japanese craft, are made First, glass is melted inside a crucible in a furnace. 1. The melted glass is wrapped around a glass rod. 2. A glass sphere is created by blowing into a tube. 3. Additional melted glass is wrapped around the first sphere. 4. A hole is created to pass a thread through. 5. After blowing a second larger glass sphere, the two spheres are separated by cutting off the first smaller sphere. 6. The edges are smoothed slightly, purposefully leaving a rough, jagged edge. 7. Finally, the glass sphere is hand painted from the inside. From 2:00 in the video, you can take a look at Kenichi Otsuki (大槻賢一) (a craftsman of Shinohara Furin Honpo (篠原風鈴本舗)) as he creates Edo Furin by hand. More About "Edo Furin," a Traditional Japanese Craft Photo：Edo Furin, a traditional Japanese craft One of the striking features of Edo Furin is the sound created by the jagged glass edge, which is similar to the sound of a bell cricket in fall. "Shinohara Furin Honpo," the Edo Furin store introduced in the video, is located in Asakusa, Edogawa, Tokyo (東京都江戸川区浅草) and currently sells a variety of Edo Furin as well as offering glassblowing experiences and Edo Furin decorating experiences. Edo Furin can also be purchased online with prices starting at around ¥1,870. More expensive items include the Edokiriko Edo Furin which costs ¥6,050, the checkered pattern Edo Furin which costs ¥11,000 and the unique Temari design Edo Furin can be purchased for ¥44,000. (Prices correct as of December 2020) Summary of "Edo Furin," a Traditional Japanese Craft Photo：The traditional Japanese craft Edo Furin and a Woman in Yukata One of the most fascinating features of Edo Furin is the fact that each and every one has a unique sound as a result of the traditional method used to make them, a method which has been passed down through generations for hundreds of years. In the video, you can learn about the history and unique characteristics of Edo Furin as well as how they're made!

伝統工芸品美濃焼紹介動画について こちらの動画は「瑞浪市大好き」が公開した「美濃焼観光PRムービー　瑞浪市観光協会」です。 食事をするときに、綺麗な食器が使われていると目でも楽しめテンションがあがりますよね。 こちらの記事では、日本の伝統工芸である美濃焼の特徴や種類、作り方などを動画とともに紹介します。 日本の伝統工芸である美濃焼とは 日本の代表的な伝統工芸である美濃焼は産地が数箇所あり、岐阜県の瑞浪市、土岐市、多治見市などで作られています。 お皿や、茶碗、マグカップ、コーヒーカップなどさまざまな種類のある美濃焼は、丈夫で使いやすくとても人気。 デザインも多種多様で様々な料理に合わせやすく、日本の食卓を支えている食器です。 お洒落な美濃焼は、陶磁器の生産量が日本一で、日本人の暮らしを支えている食器と言えるでしょう。 美しい陶器の美濃焼を使って、日々の食事を楽しみましょう。 日本の伝統工芸である美濃焼の作り方 芸術品のような美しさを持つ美濃焼は、職人の手仕事によって作られていきます。 ではその制作工程を簡単に紹介します。 まず、土練りと言われる工程で土を練っていきます。 続いてに成形し、形を作っていきます。 その後、天日干しなどで乾燥。 乾燥させる時間は、作品の大きさや素材の厚さによって変わります。 成形し乾燥させたら、700度から800度の窯元で焼き上げ。 下絵を書き、作品の強化のために釉薬をかけていきます。 釉薬をかけたら本焼きで、高温で焼成していきます。 本焼きが終わったら、上絵用の絵具で絵を描いて、また700から800度で焼き上げて完成です。 日本の伝統工芸である美濃焼を購入する 日本の伝統工芸である美濃焼は、岐阜県の美濃地方以外ではネットショップで購入するのがおすすめ。 また、岐阜県多治見市では美濃焼ミュージアムがあります。 各時代の焼き物が展示されており、伝統工芸品が好きな方が満足できる施設になっています。 日本の伝統工芸である美濃焼紹介まとめ こちらの動画では岐阜県美濃地方の歴史や美濃焼の職人技をご覧になることができ、とても興味深い内容になっています。 日本で人気の食器である美濃焼。 この記事を読んで興味を持たれた方はぜひ動画をご覧ください。

Introducing the Beautiful Ceramic Art, Bizen Ware This video, titled "TEWAZA (Handicraft) Bizen Pottery / Japan traditional crafts Aoyama Square" (手技TEWAZA「備前焼」Bizen pottery／伝統工芸 青山スクエア Japan traditional crafts Aoyama Square), was released by "Traditional Crafts Aoyama Square." Bizen Ware is a traditional Japanese craft with a long history and is known as one of the "Six Ancient Kilns of Japan" and well as being known as "Inbe Yaki." Bizen Ware is a traditional pottery that is popular for its solid reddish/brownish color, glassy surface, and rugged texture, which are brought out by its unique unglazed appearance through a method of high-temperature firing via direct contact with the flame. A Closer Look at Okayama's Bizen Ware Photo：Bizen Ware Bizen Ware is made of unique clay obtained from the rice fields in Okayama Prefecture. It is called one of the "Six Ancients Kilns" because it can be found in literature dating back to the Heian period (794-1185 AD). Since then, Bizen Ware has continued to produce tea ware masterpieces and successors are still being trained today. Bizen Ware has long been a prominent part of the culture and industry of Okayama Prefecture, located in Japan's Chugoku Region (中国地方, Chugoku-Chiho), and is a representative pottery of Japan. Bizen Ware is a popular pottery with ancient traditions and prestige, and is valued highly, as some of the most famous kilns have produced artists and craftsmen who have been designated as living national treasures. Having said that, modern Bizen ware is not so expensive that its unaffordable. After the Kamakura period (around 1185 to 1333 A.D.), Bizen Ware was no longer used solely by nobles and aristocrats, but was also popular as everyday utensils used by samurai and townspeople alike. The beautiful brownish and reddish color surfaces of Bizen Ware are created by the minerals contained in the special clay obtained in the vicinity of Okayama. It's fired by covering it with oily pine ashes and placing straw over it so that it is in direct contact with the flame. By firing it at high temperatures, the minerals contained in the clay become vitrified, increasing the strength and luster of the surface. Because no chemicals are used, the texture is not smooth like porcelain, but rugged with a rustic texture. How Bizen Ware is Made Source :YouTube screenshot 1. Kneading the clay (Video 0:34～) Bizen Ware commonly uses clay that lies 3-5 meters below the surface of a rice field. 2. Molding (Video 0:48～) Remove the air from the clay making it sticky and preventing cracks and crevices from forming. A potters wheel is used here. 3. Drying (Video 1:29～) Allow it to dry thoroughly. 4. Setting in a kiln (Video 1:44～) Pieces are carefully placed into the kiln to achieve the most beautiful firing results. 5. Firing the kiln (Video 2:28～) Each piece is fired for more than 10 days. Bizen Ware Patterns as Shown in the Video Source :YouTube screenshot You can see the finished pieces in the video. ・Goma (Video 3:03～) Ashes from the firewood fall on the pieces during the firing process. The ashes react with the soil and become vitrified, creating a variety of patterns. ・Sangiri (Video 3:12～) Charcoal is thrown into the kiln at the end of the firing process to create a pattern of contrasting color changes from white, blue, and yellow in parts. ・Hidasuki (Video 3:20～) This pattern is created by the reaction of the alkaline content of the straw and the iron content of the base material. Summary of Okayama's Bizen Ware Photo：Bizen ware The other name for Bizen Ware "Inbe Yaki" (Imbe Yaki) came from the local place named "Inbe." Now there are many Bizen Ware Pottery kilns and studios with galleries around Inbe Station in Okayama Prefecture, and the Bizen Ware Festival (also called the "Bizen Pottery Festival") held every autumn attracts many pottery fans and tourists from all over Japan. Even today, Okayama Prefecture promotes the history and culture of traditional Japanese crafts through Bizen Ware works. There are everyday products that can be used for everyday living, such as mugs and glasses for beer as well. 【Official Website】Bizen Ware | Traditional Crafts | Japan Traditional Crafts Aoyama Square https://kougeihin.jp/en/craft/0418/

Murakami Kibori Lacquerware - A Traditional Craft of Niigata Prefecture This video, titled "手技TEWAZA「村上木彫堆朱」Murakami Kibori Lacquerware／伝統工芸 青山スクエア Japan traditional crafts Aoyama Square," was released by "Traditional Crafts Aoyama Square." Murakami Kibori Lacquerware (Murakami Kibori Tsuishu), introduced in the video, is a general term for six types of carving, including tsuishu, tsuikoku, and shumarinuri, and it is a traditional craft of the Murakami region of Niigata Prefecture, which has been widely known as a natural lacquer production area since the Heian period (794-1185). Murakami Kibori Lacquerware was introduced by a lacquer maker in Kyoto at the beginning of the 15th century as a technique for painting lacquer on wood carvings. This was done in imitation of Chinese tsuishu (lacquerware), and the technique was introduced to the Murakami region after a temple was built there. The technique was first learned by the carpenters who built the temple, after which it was was passed on to samurai duringEdo period (1603-1868), then to the townspeople, and finally to present day Japan. In this article, we'll go over Murakami Kibori Lacquerware, a traditional lacquer technique of Niigata prefecture. The Process of Making Murakami Kibori Lacquerware Source :YouTube screenshot Along with the video, we'll be introducing some of the steps in the 18 to 20 step process that craftsmen use to make Murakami Kibori Lacquerware by hand. 1. Sketching (0:40~) This serves as a guide for engraving and is drawn directly on the wooden plate. Drawing with a brush that can express stronger and weaker lines is fundamental to the process. 2. Carving (0:47~) Wood carving is performed by using a chisel called an "Urajiro" on the sketch drawn in step 1. There are two types of carvings, the two-dimensional Shishiai-bori and three-dimensional Hikisage-bori. In the video, the craftsman explains that the most important thing is to carve the wood as though it were a living thing, making the most of the different grains of each tree. 3. Sanding (1:18~) This is the process of sanding the roughness of the blade marks with sandpaper (in the old days, horsetail was used) to give roundness and softness to the carving. This makes the work even more three-dimensional. 4. Hardening This involves adding a small amount of red husks to raw lacquer and using a brush to soak the entire wood with lacquer. This is also an important step because it is done to solidify the foundation of making a durable Tsuishu. Source :YouTube screenshot 5. Smoothing (1:29) In the important undercoating process to make durable lacquerware, raw lacquer and polishing powder are mixed and applied 2-3 times to the plain areas without engravings. 6. Polishing The process of water-polishing the coated surface using an imperial whetstone. This is done with applying rust lacquer and is repeated 2-3 times and the lacquerware is allowed to dry for at least a few days after the rust lacquering process. 7. Middle Coating (1:40~) The process of dabbing on lacquer on with a pad or fingertip and then finishing painting with a brush so that the engraved pattern is not filled with lacquer. Generally, oil-free refined lacquer is used for this. 8. Polishing the Middle Coating It is a process of carefully water-sanding the surface with a fine-grained natural stone whetstone called Murakami whetstone or a water file. 9. Top Coating (2:06~) Brightly colored vermilion lacquer is dabbed on with a pad or fingertip and finished painting using a brush so as not to fill the carved patterns similar to the intermediate coat. Source :YouTube screenshot 10. Matt Finishing (2:23~) An important process for polishing the top-coated glossy surface with charcoal or polishing powder evenly with water to make it a deep and calm-looking product. 11. Engraving (2:44~) The designs are carved once more. This fine carving is made to supplement the earlier wood carving with a fine-pointed triangular chisel. Expressions such as leaf veins, feathers, and mountain surfaces are re-engraved. 12. Finishing (3:06~) This step involves adding a small amount of red iron oxide to high-quality raw lacquer and rubbing it with a brush over the entire vessel. The matte surface is moist and firm, and this completes the production process of Murakami Kibori Tsuishu. The beautiful, finished product, like a work of art, can be seen from 3:23 in the video. These unique techniques have been designated Intangible Cultural Properties of Niigata Prefecture and Murakami Kibori Lacquerware was designated a National Traditional Craft. Summary of Murakami Kibori Lacquerware, A Traditional Welcome Gift of Niigata Prefecture Source :YouTube screenshot Murakami Kibori Lacquerware, a traditional craft that has been handed down since the Heian period, includes products such as jubako (stacked boxes), sake cups, tea ware, flower ware, confectionery ware, sake ware, etc. that are all great for celebrations, souvenirs, and gifts. Murakami Kibori Lacquerware is a testament to the living history of Japan, through which you can enjoy the techniques that craftsmen have refined and passed down since ancient times. 【Official Website】Murakami Kibori Lacquerware | Traditional Crafts | Traditional Crafts Aoyama Square https://kougeihin.jp/en/craft/0509/

What is Mino Handmade Washi, a Traditional Craft of Mino City, Gifu Prefecture? Video introduction of the production process This video, titled "Paper Making at the Mino Washi Studio "Corsoyard" (美濃手漉き和紙工房Corsoyardの紙づくり「本美濃紙」), was created by "Handmadepaper Corsoyard." It introduces the process of making handmade Mino Washi paper. Making traditional Mino Washi involves a series of complicated processes which you can learn more about in this introductory video. The Mino Handmade Paper Co-operative (美濃和紙協同組合) and Mino Washi Preservation Society (美濃和紙保存会) have successfully preserved the traditional Japanese craft of Mino Washi throughout the years. Together with Sekishu-banshi (石州半紙) and Hosokawashi (細川紙), Mino Washi (Honminoshi) was registered as an Intangible Cultural Heritage in Japan in 2014. How Mino Washi is Made Source :YouTube screenshot As you can see from 0:08 in the video, Mino Washi is made from the highest quality mulberry called kouzo (楮), a special breed specifically used for making Mino Washi, using traditional Japanese techniques. The first step to making Mino Washi involves soaking the paper mulberry overnight in water and washing away any impurities in a process called "Mizusarashi" (水晒し). The paper mulberry may also then be removed from the water and laid out on the ground, being exposed to the sunlight in a process called "Agesarashi" (あげ晒し). From 5:56 in the video, you can see the mulberry plant material being boiled in a process called "Shajuku" (煮熟) after which the material is pounded. Traditionally, potassium bicarbonate extracted from wood ash was used during the boiling process. However these days, sodium carbonate, sodium bicarbonate or sodium hydroxide are commonly used, depending on the type of material being used. The fibrous material is then poured into a vessel called a "Sukifune" which the craftsmen can then use to create the Mino Washi paper. The fibers can be easily broken down due to removal of dirt and impurities in the previous steps. From 30:57 in the video, you can see the large sheets of washi paper being taken outdoors to dry in the sun. As there are many important steps and rules to follow in order to make Mino Washi, it is essential that all of the craftsmen are highly skilled. There are currently only five craftsmen, members of the Mino Washi Preservation Society, who are able to make Mino Washi using traditional techniques. Where to Purchase Mino Washi Source :YouTube screenshot There are many stores and workshops in the Mino area of Gifu prefecture where you can buy handmade Mino Washi paper. The natural materials and traditional techniques together produce paper that has a beautiful, transparent finish characteristic of Mino Washi. Mino Washi paper is often used to make Japanese sliding doors called "Fusuma" (襖) and "Shoji" (障子). Recently, Mino Washi is gaining in popularity and you can now find a variety of items made from Mino Washi, such as "Gifu Uchiwa Fans" or "Goshuincho," books used to collect shuin stamps at shrines and temples. Accessories or origami made from Mino Washi also make great gifts! Many of these traditional craft goods can be purchased for a reasonable price so be sure to check out what's available! Mino Washi products can be purchased online as well as at stores and workshops in Gifu prefecture. Summary of Mino Washi Paper - A Traditional Craft of Japan Source :YouTube screenshot We hope you enjoyed watching this introductory video outlining the complicated processes involved in making the traditional Mino Washi paper of Mino, Gifu. Mino Washi is handmade paper of the highest quality and has even been registered as an Intangible Cultural Heritage of Japan. If you're traveling to Gifu, an area which famous for the World Heritage Site Shirakawa-go (白川郷), be sure to check out the beautiful Mino Washi items on sale!

Video Introduction of Japanese Drum Artisans in Hakusan City, Ishikawa Prefecture "# 005 Wadaiko Tetsuro Sugiura: Door to Tomorrow by At Home" is an interview with the Wadaiko craftsman introduced in the Discovery Channel program "Tomorrow's Door." Tetsuro Sugiura, a wadaiko craftsman of "Asano Taiko" in Japan's Hokiriku region, Hakusan City, Ishikawa Prefecture, trained long and hard before becoming a full-fledged wadaiko craftsman. This time, let's take a closer look at Japanese traditional crafts, and the technique used for making Japanese drums, which takes several years to learn. About the Traditional Culture of Japanese Wadaiko Introduced in the Video Photo：Wadaiko Wadaiko is one of the Japan's historical musical instruments that is played at festivals that are held all over Japan, such as Kyoto and Fukuoka. It is also used at ceremonies at shrines and temples, as well as for Kabuki and Noh. Its origin dates way back, and the oldest Japanese taiko drum was excavated from the remains of the Jomon period (14000 BC- 400 BC). A Japanese drum (Wadaiko) is a percussion instrument that is made of wood and has a body covered with leather. There are various types of Japanese drums that are currently used, such as a long drum, tub drum, and an attached drum. How Wadaiko Are Made Source of photo :YouTube screenshot The production process of the traditional Japanese drum, Wadaiko, is introduced in detail from 2:09 in the video. The two main tasks to make the taiko, are the making of the body and the making of leather. A Japanese drum craftsman cuts down a zelkova tree, which is then used as a raw wood without any treatment. They then cut the body of the zelkova and roughly forms it into its final shape, which is then naturally dried in a cool and dark place for 3 to 5 years. The carving on the inside of the drum is beautifully hand-crafted to have a tortoiseshell or diamond-like pattern. You can see the inner carving process from 3:01 in the video. Source of photo :YouTube screenshot Next, as you can see from 3:18 in the video, a refined technique is essential for lacquer painting. In the process of making leather, from 3:25 in the video, the skill of the Japanese drum craftsman integral to creating the beautifully processed cowhide, which will cover the drum. After putting the leather over the drum the sound is checked, and if sufficient, tacks are attached to complete the work. You can see the finished product from 4:43 in the video. Each taiko drum takes several years to complete and many craftsmen are involved in the crafting process. From 4:56 in the second part of the video, you can see the craftsmanship of the Japanese drum artist Tetsuro Sugiura, who is a leather craftsman. An interview with Mr. Tetsuro Sugiura is introduced in detail where he talks about the process of leather making, which is the cornerstone of each drum's sound. Summary of Japan's Traditional Wadaiko Craftsmen Source of photo :YouTube screenshot The video shows the long and delicate process of making large Japanese taiko drums. No special qualifications are required for the production of wadaiko, but long and rigorous training is required to craft wadaiko that produce beautiful, dynamic sounds of art. This craft relies much on feel, and thus requires diligent and highly skilled Japanese drum craftsmen. 【Official Website】Asano Taiko https://www.asano.jp/en/

Bingata - A Traditional Japanese Craft This video, titled "BINGATA – Az okinawai textilfestés," was created by "Teodora Vegh." It introduces Rei Ishida (石田麗), who currently makes Bingata in a workshop in Oita Prefecture (大分県). Bingata is a traditional dyeing technique representative of Okinawa, and is sometimes referred to as "Ryukyu Somemono" (琉球染物). This dyeing technique is used to create beautiful clothing items and accessories which are available for purchase. Check out the video to learn more about the history of this traditional craft and how Bingata products are made! The History of Bingata, A Traditional Japanese Craft Source :YouTube screenshot The Bingata dyeing technique has been used in Okinawa since the 13th century. It's said that this technique was developed to create kimono for the royal family at the time. The kanji characters for "Bingata," which until then was simply written in hiragana, were chosen during the Showa period (1926 AD - 1989 AD). Since the Second World War, Bingata workshops have opened up all over Japan and items are now produced as works of art. How Bingata is Made Source :YouTube screenshot The craftsmen must first design and create a stencil that will be used to apply a motif to the fabric. The stencil is cut out carefully by hand. This process can be seen at 0:40 in the video. Once the stencil is made, a paste is applied on top of the stencil (1:38 in the video) followed by paint to apply color to the material. The brushes used to dye the fabric are often made from human hair. Other dyeing methods such as Tsutsugaki (筒描き) and Aizome (藍染) are often used, as well as the traditional Bingata dyeing technique. After applying color, the fabric is then steamed and soaked in water to remove the paste. The Bingata dyeing process shown in the video is as follows: 1. Design 2. Stencil carving (0:39～) 3. Paste application (1:44～) 4. "Gobiki" (2:36～) 5. Color application (3:05～) 6. "Sumitori" (4:03～) 7. Steaming 8. Soaking 9. Nori paste application 10. Dyeing 11. Steaming 12. Soaking 13. Sewing 14. Finish Purchasing Bingata Dyed Goods Source :YouTube screenshot Bingata fabric is used to create many items such as furoshiki (風呂敷), tapestries, accessories, kimono, yukata, furisode (long-sleeved kimono) and hanhaba obi (half-width obi/kimono sash). The bright, bold coloring of Bingata dyed goods is typical of Okinawa. Bingata items can be purchased in workshops and gift shops around Okinawa and Kyushu. In recent years, the number of Bingata items being sold online has been increasing making it even easier to find and purchase the patterns that suit you best. Summary of Bingata, A Traditional Craft of Okinawa Source :YouTube screenshot Making beautiful Bingata dyed goods like those introduced in the video involves a series of complicated processes. Clothing and accessories made from Bingata dyed fabric make great Japanese souvenirs! Have fun searching for your favorite Bingata goods!

Echizen Lacquer Ware, a Traditional Craft of Sabae City, Fukui Prefecture - Video Introduction This video introduces Echizen lacquerware, a traditional craft in Fukui prefecture. The video “TEWAZA Japan Echizen Lacquerware（手技TEWAZA「越前漆器」Japan Echizen Lacquerware／伝統工芸 青山スクエア Japan traditional crafts Aoyama Square）” is created by “Japan Traditional Crafts Aoyama Square.” Echizen lacquerware is mainly produced in the Kawada region in Sabae city. It has an air of Japanese culture and is also very beautiful. This article will introduce how it's made, as well as some of the different products. Be sure to follow along with the video and find your favorite! The Traditional Craft, Echizen Lacquerware: Culture and History Source :YouTube screenshot Echizen lacquerware has a long history, with origins dating back to the Asuka Period (593 to 710) more than 1400 years ago. It is said that a painter, who was asked to repaint the imperial crown by the emperor, also offered a black lacquer bowl to the emperor with it, and the emperor was so impressed by the work that he helped promote its growth. After the Edo Period, (1603 to 1868) many craftsmen were thriving around Sabae city in Fukui prefecture, and their technique gradually spread throughout Japan. The Traditional Craft, Echizen Lacquerware: How Its Made Source :YouTube screenshot Echizen lacquerware uses a traditional technique that has been passed down since ancient times. The technique requires various craftsmen to be involved in the production process. 1. Lacquering (漆塗り, Urushi nuri) - (0:25) The wood is carved out and then lacquered with two or three coats of lacquer. 2. Gold Inlaying (沈金, Chinkin)- (1:25) The surface is carved and the gold foil is applied. The craftsman in the video says that the gold foil shines beautiful, like a mirror, when the chase is clear. 3. Gold lacquering (蒔絵, Makie) - (2:05) This process involves sprinkling gold dust over the lacquer. This process must be done before the lacquer is dry. According to the craftsman, the drying time of the lacquer varies depending on the humidity of each day. The Japanese method of gold lacquering has been passed down since ancient times. Lacquerware made by first-rate artisans, are very beautiful pieces of artwork. Echizen lacquerware is elegant and long-lasting. Get Your Own High-Quality Echizen Lacquerware Source :YouTube screenshot You can purchase high-quality, hand crafted Echizen lacquerware at Shikki Sajibe. There are many workshops that produce and distribute Echizen lacquerware in Sabae city. They sell everyday goods, such as bowls, chopsticks, tumblers, coffee cups, saucers, plates, lunch boxes, and more. In recent years, lacquerware manufacturing techniques have improved, and products that can be used in microwave ovens and dishwashers are on the rise. You can see Echizen lacquerware products at 3:09 in the video. There are kitchen knives, clocks, and so on, all of which are incredibly beautiful. Echizen lacquerware can also be purchased online, so if you're interested, be sure to check out some of the online retailers. The most famous Echizen lacquerware shop is Echizen Sikki Qtarou; It has been open for 94 years. In 1981 the founder Soumei Kyutaro, then 83 years old, received the fifth class Order of the Sacred Treasure award. Summary of Echizen Lacquerware The traditional craft, Echizen lacquerware, requires incredible delicacy and attention to detail. If you're looking at adding a traditional Japanese flair to your house, consider purchasing some Echizen lacquerware! It also makes for a great gift. We hope this article and video helped pique your interest in Echizen lacquerware. If you're looking for beautiful Echizen lacquerware, be sure to check out the shops and workshops in Sabae city. 【Official website】Japan Traditional Crafts Aoyama Square https://kougeihin.jp/en/