Echizen Lacquer Ware, a Traditional Craft of Sabae City, Fukui Prefecture - Video Introduction This video introduces Echizen lacquerware, a traditional craft in Fukui prefecture. The video “TEWAZA Japan Echizen Lacquerware（手技TEWAZA「越前漆器」Japan Echizen Lacquerware／伝統工芸 青山スクエア Japan traditional crafts Aoyama Square）” is created by “Japan Traditional Crafts Aoyama Square.” Echizen lacquerware is mainly produced in the Kawada region in Sabae city. It has an air of Japanese culture and is also very beautiful. This article will introduce how it's made, as well as some of the different products. Be sure to follow along with the video and find your favorite! The Traditional Craft, Echizen Lacquerware: Culture and History Source :YouTube screenshot Echizen lacquerware has a long history, with origins dating back to the Asuka Period (593 to 710) more than 1400 years ago. It is said that a painter, who was asked to repaint the imperial crown by the emperor, also offered a black lacquer bowl to the emperor with it, and the emperor was so impressed by the work that he helped promote its growth. After the Edo Period, (1603 to 1868) many craftsmen were thriving around Sabae city in Fukui prefecture, and their technique gradually spread throughout Japan. The Traditional Craft, Echizen Lacquerware: How Its Made Source :YouTube screenshot Echizen lacquerware uses a traditional technique that has been passed down since ancient times. The technique requires various craftsmen to be involved in the production process. 1. Lacquering (漆塗り, Urushi nuri) - (0:25) The wood is carved out and then lacquered with two or three coats of lacquer. 2. Gold Inlaying (沈金, Chinkin)- (1:25) The surface is carved and the gold foil is applied. The craftsman in the video says that the gold foil shines beautiful, like a mirror, when the chase is clear. 3. Gold lacquering (蒔絵, Makie) - (2:05) This process involves sprinkling gold dust over the lacquer. This process must be done before the lacquer is dry. According to the craftsman, the drying time of the lacquer varies depending on the humidity of each day. The Japanese method of gold lacquering has been passed down since ancient times. Lacquerware made by first-rate artisans, are very beautiful pieces of artwork. Echizen lacquerware is elegant and long-lasting. Get Your Own High-Quality Echizen Lacquerware Source :YouTube screenshot You can purchase high-quality, hand crafted Echizen lacquerware at Shikki Sajibe. There are many workshops that produce and distribute Echizen lacquerware in Sabae city. They sell everyday goods, such as bowls, chopsticks, tumblers, coffee cups, saucers, plates, lunch boxes, and more. In recent years, lacquerware manufacturing techniques have improved, and products that can be used in microwave ovens and dishwashers are on the rise. You can see Echizen lacquerware products at 3:09 in the video. There are kitchen knives, clocks, and so on, all of which are incredibly beautiful. Echizen lacquerware can also be purchased online, so if you're interested, be sure to check out some of the online retailers. The most famous Echizen lacquerware shop is Echizen Sikki Qtarou; It has been open for 94 years. In 1981 the founder Soumei Kyutaro, then 83 years old, received the fifth class Order of the Sacred Treasure award. Summary of Echizen Lacquerware The traditional craft, Echizen lacquerware, requires incredible delicacy and attention to detail. If you're looking at adding a traditional Japanese flair to your house, consider purchasing some Echizen lacquerware! It also makes for a great gift. We hope this article and video helped pique your interest in Echizen lacquerware. If you're looking for beautiful Echizen lacquerware, be sure to check out the shops and workshops in Sabae city. 【Official website】Japan Traditional Crafts Aoyama Square https://kougeihin.jp/en/

Introducing Kutani Ware! This article introduces Kutani ware alongside the video "Traditional Japanese Crafts・Kutani Ware Glazing" (日本の伝統工芸品・九谷焼の染め付け). Kutani ware started around the Edo Period (1603-1868) in Kanazawa city, Ishikawa in Japan's Hokuriku region. It was originally called Kokutani ware. Today, Komatsu-city, Kaga-city, and Noumi-city are famous for the production of Kutani ware. The piece in the video is by Kamide Chouzaemon, one of Japan's leading Kutani pottery makers. The video is only about a minute long, but it shows the amazing dyeing technique used to make the beautiful, traditional Japanese pottery. How Kutani Ware Is Made Source :YouTube screenshot The signature liquid cobalt oxide is used to dye Kutani ware, which gives us a feel for Japanese culture. Kutani ware is produced by using a thin brush to draw precise patterns which requires the skills of a master craftsman. Patterns are drawn on the Kutani ware, using the brown cobalt oxide as a base material, after which they are fired in a kiln. From there, the color of the brown cobalt oxide changes into a beautiful shade of blue. This method of painting Kutani ware using blue, green, yellow, purple, and red within its patterns is called Kutani Gosai. Where to Purchase the Kutani Ware Kutani ware, made by famous craftsmen and artists, is considered an art, and can be rather expensive. However, there is some Kutani ware sold at reasonable prices. Kutani ware can be viewed and purchased at museums and porcelain/ceramics markets in Kanazawa. They have Kutani ware bowls, small plates, teacups, china bowls, tea pots, vases, and more. You can buy different pieces and incorporate them into your daily life. Their products are also available on the internet through retailers such as Amazon and Rakuten. Enjoying a Kutani ware demo at a workshop also makes for a memorable experience. By adding Kutani ware to your table, you can appreciate Japanese traditional culture more deeply. Summary of Japan's Traditional Kutani Ware Source :YouTube screenshot As you can see in the video, each piece of Kutani ware is hand dyed by a craftsman. The dyeing process of Kutani ware has been handed down for hundreds of years. Be sure to watch the video to see the amazing craftsmanship of Kutani ware craftsmen.

Kanazawa Castle" in Kanazawa City, Ishikawa Prefecture, Japan Video Introduction This video, titled "Ishikawa Kanazawa Castle - 金沢城 - 4K Ultra HD" introduces information about Kanazawa castle in Ishikawa Prefecture. The video was published by "TokyoStreetView - Japan The Beautiful." Kanazawa castle is one of the most popular tourist spots in the Hokuriku Region. At Kanazawa castle, you can learn about the history of Ishikawa, Kanazawa, a place known as a prosperous castle town in Kaga Hyakumangoku. Kaga Hyakumangoku refers to the measure of wealth the Kaga region attained during the early rule of the Maeda clan and the artisan culture they promoted over the following three centuries. The video shows the beautiful Kanazawa castle, a national historical site. In the article, we'll talk about Kanazawa castle alongside the video. Try to keep up! What is Kanazawa Castle? Photo：Kanazawa Castle Park in Kanazawa, Ishikawa Prefecture Kanazawa castle is located in Marunouchi, Kanazawa, in Ishikawa prefecture (Formerly Kaga province, Ishikawa-gun, Kaganokuni). It was built on the Kodatsuno Plateau between the Saigawa River and the Asano River, which flows through the Kanazawa plains. During Edo period (1603-1868), Kanazawa castle prospered as a castle town of Kaga Hyakumangoku and was used as a residence of the Maeda clan, the head of the Kaga domain. Today, the area around the castle, including the ruins of Kanazawa Castle, a national historic site, has been developed into Kanazawa Castle Park, and is one of Kanazawa's most popular tourist attractions. Kanazawa castle was constructed from the Warring States period (1467-1615) to the Edo period and is classified as a hilltop castle with a teikakushiki layout. It has a distinctive exterior with white walls made of white mortar and flat lead tiles. The beautiful white roof tiles of Kanazawa Castle can be seen at 0:04 in the video. Hashizume mon (gate) is the highlight of Kanazawa castle. Although it was burned down in 1881, it was restored to its former glory in 2015. Be sure to check out the interesting shapes of the rocks used in the stone walls at different gates. There so many interesting spots in Kanazawa park! The castle tower was destroyed by lightning three years after Toshiie Maeda became lord of the castle after the Battle of Shizugatake. There was a plan to restore the castle tower, but due to a lack of resources, it was difficult to do so. Tour Information for Kanazawa Castle Photo：Kanazawa Castle Park in Kanazawa, Ishikawa Prefecture Kanazawa castle is open year round. Between March 1st and October 15th it's open from 7 am to 6 pm and from October 16th to the end of February it's open from 8 am to 5 pm. Admission to Kanazawa Castle is free, but there are charges to enter Hishigaya Turret, Gojukken Nagaya Warehouse, Hashizume-mon, and the Tsuzuki Yagura Turret. The admission fees for these places are 320 yen for adults and 100 yen for children. Access is about 10 minutes by taxi from Kanazawa Station. By car, it takes about 30 minutes from the Kanazawa West IC (金沢西IC) on the Hokuriku Expressway. There are 3 different parking areas near Kanazawa castle. The illumination of Kanazawa Castle and Kenrokuen is a popular seasonal event. During this time, Kenrokuen will be open to the public free of charge at night and is lit up for a limited time. The autumn foliage and the fantastic scenery of lights are must-sees. Summary of Kanazawa castle. Photo：Kanazawa Castle Park in Kanazawa, Ishikawa Prefecture The video in this article introduces the beautiful scenery of Kanazawa castle. There is so much to see at Kanazawa Castle Park. Kenrokuen is known as one of the three greatest gardens of Japan, and is a place where you can enjoy the view of a traditional Japanese garden. You can also collect a stamp from Kanazawa castle if you have a stamp book. It's a great place for history buffs as well! 【Official Website】Kanazawa castle and Kenrokuen - Ishikawa http://www.pref.ishikawa.jp/siro-niwa/english/top.html 【Tripadvisor】Kanazawa castle https://www.tripadvisor.com/Attraction_Review-g298115-d324909-Reviews-Kanazawa_Castle-Kanazawa_Ishikawa_Prefecture_Hokuriku_Chubu.html

The Takaoka Copper Casting of Takaoka City, Toyama Prefecture – A Traditional Japanese Craft This video, titled "手技TEWAZA「高岡銅器」Takaoka Copper Casting," was produced by "Japan Traditional Crafts Aoyama Square." It introduces Takaoka Copper Casting, a traditional craft in Takaoka City, Toyama. Takaoka Copper Casting in Takaoka City, Toyama originates from a factory opened in the Edo period (1603 – 1868 AD) by Maeda Toshinaga in the Kaga Maeda Clan with the seven metal casters from Tamba, Kyoto, said to be the birthplace of metal casting. Most of the Takaoka Copper Casting products are related to Buddhist tools such as vases and a large part of the production process involves the attentive handiwork of artisans. The traditional Japanese craftsmanship is appreciated even outside of Japan. The Takaoka Great Buddha at Daibutsuji Temple (大佛寺, Daibutsu-ji) is said to be one of the most impressive pieces made by the Takaoka Copper Casting artisans. This is a rare video that introduces the production process of Takaoka Copper Casting. Please enjoy watching the craftsmanship of the Takaoka copper casting artisans. Takaoka Copper Casting: One of the Greatest Treasures in Japanese Culture- How It's Done Source :YouTube screenshot Takaoka Copper Casting is essentially produced with a metal casting technique where a piece of metal is melted at high temperature and poured into a mold to form the desired shape. Japanese metal casting techniques are highly recognized worldwide, and the metal casting of Takaoka City, Toyama is especially famous. Now, let's take a look at how Takaoka Copper Casting products are made. 1. Making the original model (0:18) Based on the blueprint, a prototype is created using wood, plaster, clay and resin. This prototype becomes the grand image of the final product. 2. Making the mold (0:29) A fire-resistant material is used for the original model, and a casting is made to pour the copper into. This is said to be the most important step. The mold made from casting sand is an example of exquisite craftsmanship. 3. Refining and melting (0:44) Refining refers to the process of removing impurities and increasing the purity of the metal. The refined metal is melted and liquefied at high temperatures.. The molten copper alloy reaches 1200 degrees Celsius in this process. 4. Casting (1:00) The refined molten copper is poured into the casting. 5. Removing the mold (1:23) The cooled and hardened copper is removed from the casting and the finishing process begins. 6. Polishing (1:48) The product is beautifully polished. 7. Coloring (2:05) After coloring and inlays are added, the work is complete! At 1:31 in the video, one of the Takaoka Copper Casting artisans explains “We hope that our Buddhist statues and monuments will convey what the customer had in mind, and will be loved.” The Art Pieces of Takaoka Copper Casting Gained Worldwide Popularity at the World Expo in Paris Source :YouTube screenshot A number of art pieces such as Buddhist statues and vases made using Takaoka Copper Casting were exhibited at the World Expo in Paris, and the name has come to be known around the world. These reason these artifacts are so beautifully shaped is because they were developed through producing bronze casting products adorned with carvings. In Takaoka City, Toyama, the descendants of the master craftsmen of the past have inherited the traditional crafting techniques and skills and have created many works of art. They continue to do so even today. Summary of Takaoka Copper Casting Source :YouTube screenshot The entire process of Takaoka Copper Casting has been done with the careful handiwork of artisans for more than 400 years. "We want to pass down the 400-year-old technique to the next generation," says one of the Takaoka Copper Casting artisans at 2:26 in the video. To inherit this valuable Japanese culture, Takaoka City has held workshops of Takaoka Copper Casting to train potential artisans. Miyuki-cho in Takaoka City has the Takaoka Copper Casting Museum where you can see and purchase products. Some large bronze statues are valued at millions of yen (tens of thousands of dollars). Takaoka Copper Casting products are also available at online marketplaces such as Rakuten and Amazon, and include ochoko (small sake cups), ornaments, paperweights, and more. The most popular ones are made by Takenaka Bronze Works Co.,Ltd. The company donated a 1/100 scale bronze casting model to Zuiryuji Temple (瑞龍寺, Zuiryuji), a temple designated as a National Treasure, in Takaoka City. The temple is one of the most popular tourist spots in Takaoka City renowned for its spring event of lighting up the temple, where the bones of Oda Nobunaga and his son are buried. Tourists can visit the grave of Maeda Toshinaga, who was deeply involved in the history of Takaoka Copper Castings, by way of a path called Hocchodo, lined with stone lanterns. In recent years, nine companies that are members of the Takaoka Copper Industry Cooperative Society have made original "Takaoka Wind Chimes" and sold them at the Takaoka Regional Industry Center, Takaoka Mikurumayama Museum, and shops where crafts are sold. 【Official website】Japan Traditional Crafts Aoyama Square https://kougeihin.jp/en/