Japan’s Cutting-Edge AI Technologies Contribute to an Aging Society This video is titled "A New Aging Society Led by Japanese Technology" (日本のテクノロジーが導く新しい高齢化社会). It introduces Japan's response to an aging society using cutting-edge technology. It was released by the“Foreign Ministry / MOFA”. Currently, Japan is said to be one of the most aging societies in the world. However, an aging society is not an issue unique to Japan, but a problem growing worldwide. Living a long, healthy life and increasing opportunities to participate in society is a very important theme when faced with an aging society. In this article, we'll introduce some cutting-edge technologies in Japan that the public and private sectors are developing together. NEC the WISE: An AI Technology Adapting to an Aging Society Source :YouTube screenshot The AI technology shown in the video at 0:32 is called “NEC the WISE.” In the video, NEC Director Fellow Katsumi Emura says “the problem is not the aging society itself, but how to adapt to an aging society, so that people can live long, healthy, fulfilling lives.” In light of the global trend toward an aging society, NEC is focused on developing and providing solutions that can be used to predict and prevent various diseases. That's what the AI technology, “NEC the WISE,” is all about. If we can prevent people from getting sick as they get older, it means that people will still be able to participate in society in good health as they age. In today's society where we are told that we have 100 years to live, "retirement in our 60s" is too early. If it becomes the norm for people to remain healthy and active past 60, we will no longer be able to call it an "aging society." HAL Lumbar Support: An AI Technology That Addresses the Declining Birthrate and Aging Population Source :YouTube screenshot With Japan's declining birthrate and aging population, the age of caregivers, whose job it is to care for the sick and elderly, is increasing every year. The "HAL Lumber Support" project, which can be seen at 1:02 in the video, is a project to introduce nursing care robots to reduce the physical burden on caregivers in the nursing care industry. The video introduces AI technology that places an assistive robot suit on a caregiver's waist and receives biopotential signals emitted by the brain and transmits them to the power-assist suit to reduce the strain on the back and lower body. This is an AI technology that can be applied patient side as well. In addition, because HAL is an artificial intelligence (AI) equipped support robot, repeated use of the robot helps it learn how neurotransmission works and can assist in walking more efficiently. It's not just a robot that moves according to commands, it's an autonomous machine that learns on its own, meaning that the cyborg robots you see in science fiction movies are already a reality. These mechanized technologies are collectively referred to as Hybrid Assistive Limb” (HAL). Summary of Japan's Cutting-Edge AI Technology and Measures for an Aging Society As seen at the end of the video from 1:30, Japan’s cutting-edge technology “HAL” is already being applied to medical technology in Malaysia. It is believed that increased social participation opportunities for the elderly with the help of autonomous robots will increase the well-being of society. It'll be interesting to see what Japan, the superpower of robots, has to offer in the future. 【Official Website】Cutting-Edge AI Technologies – NEC the WISE - : Solution/ Service | NEC https://www.nec.com/

TEZUKA2020 - A Project to Create a Work of Osamu Tezuka Using AI Technology This video, titled "TEZUKA2020 Official Movie" (TEZUKA2020 オフィシャルムービー), is a a video introducing a project to create the newest work of the god of manga, Osamu Tezuka, using AI technology and manpower. Upon hearing that a new manga by Osamu Tezuka would be released, many fans around the world were in awe. Using cutting-edge AI technology, the project was able to create characters and basic story elements. Based on these elements, humans filled in the story, and a new work by Osamu Tezuka was born. You can see it being made in the video. In this article, we'll introduce "TEZUKA2020," a project to create an Osamu Tezuka manga using AI. Be sure to follow along with the video! Genius Manga Artist Osamu Tezuka Source :YouTube screenshot Osamu Tezuka was one of Japan's leading manga artists and was highly regarded as the "God of Manga." His real name is “Osamu Tezuka, written 手塚治 in Japanese, but he used the characters 手塚治虫 (same pronunciation) as a pen name. He was born in 1928 in Takarazuka, Hyogo prefecture, in Japan's Kansai region. Besides being a manga artist, he was also an animator and animation director. He completed 700 titles, and drew more than 150,000 sheets of manuscripts before he passed in 1989. He was famous for story mangas with the theme of life, science, and future, and he still has many fans around the world to this day. Osamu Tezuka's debut work was "Ma-chan’s Diary." At the time it was a complete hit, and there were even dolls and snacks based on characters from the story. His major works are ASTRO BOY, Jungle Emperor Leo, Princess Knight, Black Jack, The Three-Eyed One, Phoenix, Buddha, Ayako, A Tree in the Sun, A Message to Adolf, and the list goes on. TEZUKA2020 Source :YouTube screenshot TEZUKA2020 is a project to create a new work by Osamu Tezuka through a collaboration between cutting-edge AI technology and humans. The plot overview and characters are created by AI, and using these elements, humans fill in the plot and draw manga. From 1:30 in the video, Osamu Tezuka’s son, Makoto Tezuka, a director of Tezuka Production, says in an interview "the possibility of AI creating a new Osamu Tezuka manga is not zero percent, so it's worth a try." Most people thought AI could create a complete character design, but the design that the AI designed was far from ideal. This can be seen at 4:45 in the video. When creating characters, using only Tezuka manga data was not enough for the AI to study, to remedy this, AI researchers used NVIDIA’s hyperrealistic face-generating technology, and had the AI learn to draw faces. The work, which ended up being a herculean task, was titled "Paidon," and it was published on Kodansha Publishing’s Weekly Morning magazine as a two-part episode. Paidon is a story based in Tokyo in 2030. The main character of the story is a homeless philosopher, and he turns his back on a highly regulated society, solving crimes with a small robotic bird, Apollo. Summary of TEZUKA2020 Source :YouTube screenshot The video "TEZUKA2020 Official Movie," posted by "KIOXIA-JP," introduces the collaboration project TEZUKA2020, that uses cutting-edge AI technology and manpower to create a work by the late Osamu Tezuka You can see the new Osamu Tezuka work being created in the video. "Paidon," created using AI turned out to be a pretty good work. If you still haven't yet, be sure to watch the video to see the amazing AI technology in action. 【Official Website】KIOXIA #FUTURE MEMORIES 01 “TEZUKA 2020” https://tezuka2020.kioxia.com/en-jp/

The Cutting-Edge Robotics Company, FANUC This video, titled "FANUC Product Introduction (Full Version) 2020" (ファナック 商品紹介（フルバージョン） 2020), was uploaded by "FANUC CORPORATION." Have you heard of the robotics company FANUC? FANUC is a Japanese electrical equipment manufacturer that ranks first in the world in sales of robots and peripheral machine products for factory automation equipment. They're located in Oshinomura(忍野村,Oshinomura), Minamitsuru Ward(南都留郡,Minamitsurugun), Yamanashi Prefecture(山梨県,Yamanashiken). FANUC was the first manufacturer to successfully develop Japan's first numerical control device (NC) in 1956, and since then has continued to supply CNC equipment and robots for machine tools worldwide. The name FANUC has grown into an international brand thanks to its advanced technology and service. In this article, we'll introduce a number of exciting and futuristic factory automation products that FANUC will release in 2020! FANUC's CNC Series Source :YouTube screenshot FANUC’s CNC series is a vital product group that serves as the core of its FA products. The world-class CNC series, that increases productivity in manufacturing, uses an interface called iHMI, shown at 1:09 in the video, which is equipped with a high-quality AI that allows users to intuitively manipulate high-level production functions and simultaneous sharing of information regarding maintenance through networking. The FANUC servo motor offers a diverse lineup of motors that meet the needs of a wide range of customers, from small to large, and provides a comfortable manufacturing environment with excellent operability and easy maintenance. The Manufacturing Functions of FANUC Source :YouTube screenshot FANUC's products, which can be seen at 1:40 have earned a worldwide reputation for their machining performance. Even flat surface machining and shaping of complex shaped molds can be done at high speed and with high precision. AI servo tuning uses AI to automate the technology that skilled craftsmen have developed through experience. You can see the AI feed-forward tuning in progress at 3:03 in the video. In addition, the combination of CNC, servo motors, and robots makes it easy to perform complex laser engraving, metal cutting, and welding processes. About the FANUC robots introduced in the video Source :YouTube screenshot FANUC has a wide range of robots in its robot lineup, ranging from a 500 gram payload robot to a large robot with a payload of over 2.3 tons. These can be seen at 4:52 in the video. Cumulative production of FANUC robots has exceeded 640,000 units, making it the world's top producer of robots. Robomachines, its bestselling product so far, is yellow, FANUC’s brand color, but its new series, shown at 6:57, features a green color scheme and is a cooperative robot that stops moving when touched by a person. The Collaborative Robot provides a barrier-free environment for humans and robots to work together, helping to significantly improve workflow. Machines such as spot welding robots, arc welding robots, SCARA robots, handling robots, and Robodrills that incorporate high-precision vision sensors shown at 7:33 and force sensors shown at 7:51, can learn and manufacture products at higher speeds and with greater precision through the introduction of AI functionality. Summary of the Advanced Robotics Company, FANUC Although people tend to think of FA machines and robots as products for large factories, FANUC provides FA products for small and medium-sized companies as well. Its products can be operated via a tablet terminal interface and can be moved by AGVs and dollies. FANUC prides itself on its safe design, and its collaborative robots boast a safety design that does not require protective measures even in small work spaces, as they stop safely when touched by a person. The Japanese manufacturing industry is comprised of nearly 90% small and medium-sized enterprises. FANUC’s FA machines such as its small production processing machine, Roboshot and Robonano are bringing an industrial revolution to modern machining. 【Official Homepage】FANUC CORPORATION https://www.fanuc.co.jp/eindex.html